
- Interactive 3D preview
Winter Street Snow Kit: Snowmen, Snow Banks, Grit Bin, Sledges and Festive Lights
Pack for Town Street Starter: Pack for Town Street Starter: Roads, Pavements and Street Furniture for Studio
- 1
A 16-piece ski resort props kit: a chairlift tower with chairs and a gondola cabin that hang from the same cable line, snowmaking machines, piste markers, a slalom gate, snow fencing, a trail sign and the skis, poles and snowboard to go with them. Baked PBR textures, three LODs and collision on every piece.
UCX_ naming for Unreal), boxes and hulls fitted per partWorks in Unity, Unreal Engine and Godot (and anything that reads FBX or GLB). The README has import notes for each engine.
CONVENTIONS
Units: metres, real-world scale. Z-up in .blend; FBX/GLB exported Y-up (engine default).
Fronts face -Y in the .blend (forward in most engines after export).
Lift line: the cable runs along Y. On the chairlift tower the cable rests on the two sheave trains at
x = -2.30 and +2.30 m, 9.00 m above the tower's pivot (the centre of the footing on the ground).
Chair and gondola: pivot at the cable grip point (the cable's centre). The grip clamps the cable from
the piece's local -X side and the chair or cabin hangs 0.30 m out to that side, so it rolls over the
sheave trains and clears the crossarm. Keep local -X pointing away from the tower: on the +X cable turn
the piece 180 degrees about Z (it then faces +Y), on the -X cable leave it unturned (faces -Y). Chair
seats sit 2.30 m and the cabin floor 3.35 m below the cable. Checked: moved along either cable through
a tower, neither touches it.
Cables are not included (a steel rope is a simple tube: 28 mm radius in the demo scene).
Tower safety pad: place it at the tower's pivot, 0.95 m up (on the base gussets). It covers the mast
from 0.95 to 3.15 m; the ladder starts above it.
Snow fence: a 2.0 m module from x = 0 to x = 2 with a post at each end; place the next one at +2 m
along the fence's X (post pairs at the joins, like real lath fencing).
Ski pole: pivot at the grip centre, so it drops straight into a hand socket.
Everything else: pivot at the centre of the base, on the ground.
LODs: LOD0, LOD1, LOD2 share UVs and textures. LOD1 drops small hardware (bolts, rungs, nozzles,
slots, buckles); LOD2 also drops fine trims and is edge-collapsed where needed.
Collision: convex hulls and boxes (UCX_<piece>_NN inside <piece>.fbx, plus <piece>_collision.glb).
Materials: one baked PBR material per piece (512 px for the poles and markers, 1024 px for most
props, 2048 px for the tower, gondola, snow cannon and ski rack). The gondola glass is a separate
transparent material. Maps: basecolor, roughness, metallic, normal (OpenGL, +Y), normal_directx,
unity_metallic_smoothness.
| Piece | Size (m) | Triangles LOD0 / LOD1 / LOD2 | Collision | Textures | Pivot |
|---|---|---|---|---|---|
| Chairlift support tower (9 m to the cable) | 4.97 × 1.76 × 9.35 | 16,644 / 9,154 / 4,572 | 60 (5 hulls) tris | 2048 px | centre of the footing on the ground; cable rests on the sheave trains at x = -2.30 and +2.30 m, z = 9.00 m, running along Y |
| Four-seat chairlift chair | 2.31 × 0.91 × 2.88 | 6,172 / 3,394 / 1,696 | 48 (4 hulls) tris | 1024 px | cable grip point (cable centre); the grip clamps from local -X and the chair hangs 0.30 m to that side, so it rolls over the tower's sheave trains; seats face -Y, seat top 2.30 m below the cable |
| Eight-seat gondola cabin | 2.12 × 1.79 × 3.48 | 8,192 / 4,504 / 2,252 | 24 (2 hulls) tris | 2048 px | cable grip point (cable centre); the grip clamps from local -X and the cabin hangs 0.30 m to that side; doors face -Y, floor 3.35 m below the cable |
| Fan snow cannon on a carriage | 1.52 × 3.80 × 2.20 | 9,708 / 5,338 / 2,658 | 68 (6 hulls) tris | 2048 px | base centre |
| Snow lance (7 m) on a stand | 1.94 × 5.30 × 6.45 | 1,608 / 968 / 484 | 32 (3 hulls) tris | 1024 px | base centre (base plate on the ground); the lance leans towards -Y |
| Piste marker pole, blue (round sign) | 0.31 × 0.08 × 1.91 | 920 / 506 / 252 | 44 tris | 512 px | base centre (pole foot on the snow); sign faces -Y |
| Piste marker pole, red (square sign) | 0.28 × 0.08 × 1.91 | 580 / 318 / 156 | 44 tris | 512 px | base centre (pole foot on the snow); sign faces -Y |
| Piste marker pole, black (diamond sign) | 0.30 × 0.08 × 1.91 | 580 / 318 / 156 | 44 tris | 512 px | base centre (pole foot on the snow); sign faces -Y |
| Slalom gate with panel | 0.82 × 0.06 × 1.84 | 2,576 / 1,416 / 708 | 12 tris | 1024 px | base centre (between the pole feet); panel faces -Y |
| Timber snow fence, 2 m module | 2.00 × 0.13 × 1.50 | 6,552 / 3,602 / 1,248 | 12 tris | 1024 px | left end on the ground (x = 0); runs along +X to x = 2.0 m, lath face -Y; repeat every 2 m |
| Trail sign post with four arrow boards | 1.68 × 0.24 × 2.98 | 1,192 / 654 / 322 | 36 (3 hulls) tris | 1024 px | base centre; boards face -Y |
| Tower safety pad | 1.04 × 1.05 × 2.20 | 4,036 / 2,218 / 1,108 | 44 tris | 1024 px | centre of the pad's base; fits round the chairlift tower mast: place it at the tower pivot, 0.95 m up (on the gusset tops), so it covers 0.95 to 3.15 m |
| Pair of skis with bindings | 0.23 × 1.70 × 0.10 | 3,480 / 1,914 / 956 | 12 tris | 1024 px | base centre; tips face -Y |
| Ski pole | 0.10 × 0.13 × 1.30 | 716 / 392 / 196 | 16 tris | 512 px | grip centre (hand socket); shaft points down -Z |
| Snowboard with bindings | 0.31 × 1.55 × 0.26 | 3,084 / 1,696 / 848 | 24 (2 hulls) tris | 1024 px | base centre; nose faces -Y |
| Ski rack with five pairs of skis and poles | 2.00 × 0.87 × 1.68 | 19,188 / 10,552 / 5,276 | 36 (3 hulls) tris | 2048 px | base centre |
Blender check (Blender 5.2.1): every shipped FBX and GLB file was re-imported (112 of 112 loaded with their meshes); the cable rests at 9.01 m on both sheave trains; chairs and cabins swept along both cables through the tower touch it 0 times; the tower pad clears the mast by 3.5 cm; the fence module runs -0.00 to 2.00 m.

Pack for Town Street Starter: Pack for Town Street Starter: Roads, Pavements and Street Furniture for Studio

Pack for Town Street Starter: Pack for Town Street Starter: Roads, Pavements and Street Furniture for Studio

Pack for Town Street Starter: Pack for Town Street Starter: Roads, Pavements and Street Furniture for Studio

Pack for Town Street Starter: Pack for Town Street Starter: Roads, Pavements and Street Furniture for Studio
Own this asset? Sign in to review it.
No reviews yet. Owners can share how the asset worked for them.
Sign in to ask the creator a question.
No questions yet. Ask about formats, compatibility or licensing.