Skip to content
AssetLoom
Interactive 3D preview (reduced-detail model, 77,112 triangles · 1.6 × 0.5 × 0.8 m). The downloadable files are the full-resolution originals.

Description

A set of 14 unbranded wheel and tyre pieces for car renders, product visualisation, garages and showrooms: ten complete wheel and tyre assemblies at real sizes, a brake disc and caliper set, a tyre stack, wheel chocks and a wheel hardware set. Real tyre size codes and diameters, real offsets and stud patterns, real tread geometry and 2K PBR materials baked with real surface detail.

Alloy wheels (on summer tyres)

  • 18x8 ET45 five twin-spoke in gloss silver, 225/40R18
  • 19x8.5 ET40 ten-spoke in clean hyper-silver paint, 245/35R19
  • 17x7.5 ET45 cross-spoke mesh (seven Y-fork spokes tied by a bridge ring), in hyper silver, 215/45R17
  • 20x9 ET35 SUV wheel with six curved directional spokes, satin black with a bright machined lip, 255/45R20
  • 18x9 ET35 deep concave six-spoke in satin bronze, 235/40R18

Steel, off-road and spare

  • 16x6.5 pressed-steel wheel with 8 round vents, black paint chipped at the flange, 205/55R16 all-season tyre, plain and with a clip-on generic 7-spoke silver wheel trim
  • 17x8.5 ET0 black off-road wheel with a bolted simulated beadlock ring (24 bolts) on a 265/70R17 all-terrain tyre: stepped blocks, low tie bars in the grooves, shoulder lugs onto the sidewall
  • 16x7 modular steel wheel with 8 round holes in white on a 245/75R16 mud-terrain tyre: mixed-length lugs with tapered walls, angled leading edges, stepped notches, low ribs between the lugs and shoulder lugs onto the sidewall
  • T125/80R16 space-saver spare on a narrow yellow steel wheel with a shallow tread

Workshop pieces

  • 330 mm vented brake disc (drilled and slotted, top hat), two-piece fixed caliper painted red with no text (bridge arms with bolts, mounting lugs, bleed nipple), pads with backing plates and a hub with 5 studs; it shares the wheel origin and fits inside the 18 to 20 in wheels (hub studs on 5x112)
  • Stack of four bare 205/55R16 tyres, rubber wheel chocks joined by a taut rope, and a hardware set: conical-seat lug nuts, a locking nut and key, two plain centre caps, rubber and metal valve stems and a 4-way wheel brace

Works in Studio with the EV Car Starter

Owners of the EV Car Starter (1.2.0 or newer) also get five of these designs as detailed Studio wheels for the Starter's Wheels slot, on the fastback and the crossover: 22 in five twin-spoke silver, 22 in cross-spoke mesh silver, 22 in directional satin black with a machined lip, 22 in deep concave nine-spoke gunmetal with a machined lip, and a 20 in off-road wheel on an all-terrain tyre (crossover only). They are sized for the Starter, with real tread blocks in the mesh, bevelled spokes and seated lug nuts, 2K baked PBR maps and lighter levels of detail for far cars. The download files are unchanged.

Built like real wheels

  • Tyres with a real cross-section: bead seated on the rim with no gap, bulged sidewall, rim-protector rib, rounded shoulder, crowned tread with grooves and blocks 7 to 17 mm deep that repeat around the tyre with no seam; sipes, two thin ring ribs and short raised dashes in the normal map; no lettering
  • Rims with bead seats, drop centre and flanges visible from behind, spokes with rounded window corners and bevelled edges, lug holes with conical seats, centre bore, plain centre caps and valves
  • Dark grey rubber with a slightly shinier moulded sidewall and dust in the grooves; paints with light brake dust in recesses; a bright machined lip on the 20 in wheel; chipped steel paint

Specs

  • Formats: GLB, FBX, OBJ/MTL (one file per piece) + Blender source
  • 429,964 triangles for the whole set (quad-dominant; the brake disc's drilled holes are triangulated)
  • 2K PBR per piece: albedo, normal (OpenGL), roughness, metallic, AO
  • All designs are generic and unbranded. Previews rendered in Cycles; the garage, stands and backdrop in the previews are dressing only and are not part of the product

Conventions

Units: metres, real-world scale. Z-up in the .blend; GLB, FBX and OBJ exported Y-up.
Wheels and brake set: pivot at the hub centre, rotation axis X, show face toward +X, mounting face (hub contact plane) at x = 0,
        so the offset (ET) is real. Loose items (tyre stack, chocks, hardware): bottom centre on z = 0.
Tyre diameters: computed from the size code (rim x 25.4 + 2 x section x aspect), checked on the mesh within 1 %.
Naming: every object, material and texture is prefixed cwt_.
Textures: one 2048 px PBR set per piece: _albedo, _normal_gl, _roughness, _metallic, _ao (PNG 8-bit).
          DX normal = flip the green channel; ORM can be packed from the three maps.
UVs: unwrapped inside 0-1; overlap under 0.1 % on every piece except thin slivers on the mud-terrain lug walls (about 0.53 %).

Render and engine notes

  • Blender (Cycles or EEVEE): open the .blend; textures resolve from ../textures. Each piece has its own collection. The floor slab in PREVIEW_ONLY is not a product piece.
  • To fit a wheel to a car: place the pivot on the hub centre and spin about local X; mirror or rotate 180 deg about Z for the other side.
  • The brake set shares the wheel frame (hub face at x = 0) and fits inside the 18, 19 and 20 in wheels at the same origin; the 16 and 17 in wheels are too small for a 330 mm disc. The hub studs are on 5x112 and line up with the 18 in twin-spoke; on the 5x114.3 wheels hide the studs or use the hub without them.
  • GLB embeds its textures; FBX and OBJ/MTL reference ../textures. Unreal: flip the green channel of _normal_gl and pack ORM. Unity: _normal_gl as is.
  • Static render models: no LODs, colliders or rigs. No text, logos, brand names or lettering; generic spoke designs and generic tread patterns.

File check

  • All 14 pieces re-imported from the shipped GLB, FBX and OBJ (42/42) with materials and textures resolved and identical triangle counts.
  • 0 loose vertices or edges, 0 degenerate faces, consistent normals; UVs inside 0-1; pivots verified; tyre diameters within 1 % of the size code.
PieceSize X x Y x Z (m)TyreTrianglesPivot
cwt_alloy_5_twin_spoke_180.24 x 0.64 x 0.64225/40R18 (637 mm)32,200hub centre, axis X
cwt_alloy_10_spoke_190.26 x 0.65 x 0.65245/35R19 (654 mm)34,312hub centre, axis X
cwt_alloy_cross_mesh_170.23 x 0.62 x 0.62215/45R17 (625 mm)33,678hub centre, axis X
cwt_alloy_directional_200.27 x 0.74 x 0.74255/45R20 (738 mm)36,940hub centre, axis X
cwt_alloy_concave_6_spoke_180.27 x 0.65 x 0.65235/40R18 (645 mm)31,128hub centre, axis X
cwt_steel_wheel_160.20 x 0.63 x 0.63205/55R16 (632 mm)29,252hub centre, axis X
cwt_steel_wheel_16_trim0.23 x 0.63 x 0.63205/55R16 (632 mm)34,912hub centre, axis X
cwt_offroad_beadlock_170.28 x 0.80 x 0.80265/70R17 (803 mm)44,912hub centre, axis X
cwt_offroad_steel_8hole_160.27 x 0.77 x 0.77245/75R16 (774 mm)48,652hub centre, axis X
cwt_space_saver_160.14 x 0.61 x 0.60125/80R16 (606 mm)26,256hub centre, axis X
cwt_brake_disc_caliper_set0.13 x 0.33 x 0.37-16,418hub centre, axis X
cwt_tyre_stack_40.65 x 0.66 x 0.81205/55R16 (632 mm)47,488bottom centre
cwt_wheel_chocks_pair0.57 x 0.19 x 0.11-5,992bottom centre
cwt_wheel_hardware_set0.50 x 0.55 x 0.04-7,824bottom centre

Technical details

Formats
GLB, FBX, OBJ, BLEND, PNG
Software
Blender, Unity, Unreal Engine, Godot, Maya, Cinema 4D, 3ds Max
Provenance
Procedural
AI training
prohibited
Polygon count
429964 tris
Rigged
No
Animated
No
PBR materials
Yes
Texture resolution
2k
UV unwrapped
Yes
Units
m

Version history

Latest version 1.2.0, released .

  1. 1.2.0

    Documentation tidy-up: README with the product name, version, licence and support details, and current product names. No changes to the models or files.

  2. 1.1.1

    File tidy-up: cleaner file metadata and notes; no changes to the models.

  3. 1.1.0

    1.1.0: works in Studio with the EV Car Starter: five designs rebuilt as detailed Studio wheels for its Wheels slot (fastback and crossover); download files unchanged. 1.0.0: First release.

  4. 1.0.0

  • Pack (adds parts to a Starter)Studio-readyFiles validated
    • Interactive 3D preview

    Garage and Workshop Storage Set: 13 Unbranded PBR Pieces

    Pack for House Starter: Pack for House Starter: Modular Suburban House with Floors, Stair and Rooms

    • 1
    300 creditsNo reviews yet
  • Pack (adds parts to a Starter)Studio-readyFiles validated
    • Interactive 3D preview

    Books and Shelf Decor Set: 24 Render-Ready PBR Models

    Pack for House Starter: Pack for House Starter: Modular Suburban House with Floors, Stair and Rooms

    300 creditsNo reviews yet

Reviews

Own this asset? Sign in to review it.

No reviews yet. Owners can share how the asset worked for them.

    Questions & comments

    Sign in to ask the creator a question.

    No questions yet. Ask about formats, compatibility or licensing.