Skip to content
AssetLoom
Interactive 3D preview (reduced-detail model, 59,260 triangles · 1.8 × 0.7 × 1.7 m). The downloadable files are the full-resolution originals.

Description

A set of 13 unbranded garage and workshop pieces for archviz garages and workshops, film and previs set dressing and product shots, at real-world scale with 2K PBR materials baked with real wear: orange-peel powder coat with small clustered edge chips (subtle at normal viewing distance), satin scuffs, grime at low parts, butcher-block staves and end grain.

Workshop furniture

  • Steel workbench 1800: folded-steel frame with box-section legs, levelling pads and C-channel rails with returns, 38 mm laminated beech butcher-block top with visible staves and end grain, 3-drawer pedestal with bar pulls, lower shelf tray and back upstand
  • Roller cabinet with top chest: 6 inset drawers of varied heights with 3 mm gaps and full-width aluminium pull rails, rubber top mat, side push handle, 2 swivel castors with brakes and 2 fixed; top chest with lid shut line, hinge, hasp, 4 drawers and carry handles
  • Boltless shelving 1800: 5 tiers, galvanised slotted-angle uprights with real keyhole slots, folded beams with a ledge and rivets, chipboard shelves, plastic feet
  • Steel wall cabinet: face frame with a reveal, two doors with folded 15 mm edges inset with 3 mm gaps, barrel hinges, recessed pull pocket with lock, pressed side louvres, hand wear around the pull

Storage and tools

  • Pegboard with hand tools: 1200 x 600 mm galvanised panel with 1,152 real square through-holes on spacer battens; single, double and J-loop hooks seated in the holes; claw hammer, 3 screwdrivers, adjustable spanner, 5 graduated combination spanners on a peg rail, combination and long-nose pliers, blank tape measure, hacksaw and utility knife, each hung on (or, for the tape, resting in) its hook
  • Louvre bins and lidded boxes: 9 front-open slate-blue bins in 3 sizes with ribs, rims and empty label slots, plus 2 stacked frosted lidded boxes with clip handles (rendered opaque)
  • Cantilever toolbox shown open with two divided trays on linkage arms

Garage equipment

  • Air compressor 24 L: welded tank with weld beads, feet, wheels, motor shroud with cooling slots, finned pump cylinder, two gauges with tick marks only, regulator knob, quick coupler, coiled hose hung on the handle
  • Cable reel: cable wound as real helical turns, four generic 3-pin sockets with hinged covers, crank, tubular frame, plug on the free end
  • Bench vice 125: drafted cast body with fillets, swivel base with lock levers, serrated jaw plates with screws, anvil pad, T-handle; paint worn to bare metal on jaws and anvil
  • Trolley jack 2 t with folded C-section side plates (18 mm returns), boxed lift arm with link and ram, cast pump block with reservoir and release knob, pinned handle socket, flanged front wheels with hubs, rear swivel castors with forks, two-piece handle; axle stands (pair) with folded L-angle legs and base ring, steel ratchet column with teeth cut into the bar, and a locking pawl; aluminium step ladder shown open with ribbed treads and tool-tray platform

Pairs with the Car Wheels and Tyres Set and Vehicle Roof and Cargo Accessories for complete garage scenes.

Specs

  • Formats: GLB, FBX, OBJ/MTL (one file per piece) + Blender source
  • 156,916 triangles for the whole set (mostly quads; triangle fans on end caps and cut-outs)
  • 2K PBR per piece: albedo, normal (OpenGL), roughness, metallic, AO
  • Palette: anthracite powder coat, slate blue, galvanised steel, satin aluminium, beech, black-grey rubber
  • All designs are generic and unbranded. The garage walls, floor and backdrop in the previews are dressing only and are not part of the product

Conventions

Units: metres, real-world scale. Z-up in the .blend (front -Y); GLB, FBX and OBJ exported Y-up.
Floor pieces: pivot at the bottom centre on z = 0 (castors, feet and pads touch the floor).
Wall pieces (pegboard, wall cabinet): pivot at the bottom centre of the back (wall-contact) face, y = 0, front -Y.
Bench vice: pivot at the bottom of its swivel base, sits straight on the workbench top (z = 0.900 m).
Naming: every object, material and texture is prefixed gws_.
Textures: one 2048 px PBR set per piece: _albedo, _normal_gl, _roughness, _metallic, _ao (PNG 8-bit).
          DX normal = flip the green channel; ORM can be packed from the three maps.
UVs: unwrapped per piece inside 0-1, overlap at most 0.08 % of used texels.

Render and engine notes

  • Blender: open the .blend; textures resolve from ../textures. Each piece has its own collection. The floor slab in PREVIEW_ONLY is not a product piece.
  • Drawers, doors and lids are closed, with real shut-line gaps; the cantilever toolbox is modelled open.
  • Each per-piece GLB embeds its own textures (most of the zip size); FBX and OBJ/MTL reference ../textures. Unreal: flip the green channel of _normal_gl and pack ORM. Unity: _normal_gl as is.
  • Static render models: no LODs, colliders or rigs. No text, logos, brand names or model numbers.

Quality

  • All 13 pieces open from the GLB, FBX and OBJ with materials and textures resolved and identical triangle counts.
  • 0 loose vertices or edges, 0 degenerate faces; UVs inside 0-1; pivots verified.
PieceSize X x Y x Z (m)TrianglesPivot
gws_workbench_steel_18001.80 x 0.75 x 0.956,392bottom centre
gws_roller_cabinet_with_top_chest0.82 x 0.48 x 1.4311,028bottom centre
gws_pegboard_panel_with_tools1.20 x 0.10 x 0.6048,940back face, bottom centre
gws_boltless_shelving_18000.91 x 0.46 x 1.8024,400bottom centre
gws_louvre_bins_set1.08 x 0.87 x 0.4911,076bottom centre
gws_step_ladder_3_tread0.48 x 0.82 x 1.502,328bottom centre
gws_air_compressor_24l0.80 x 0.43 x 0.6813,188bottom centre
gws_cable_reel_25m0.31 x 0.80 x 0.4214,580bottom centre
gws_wall_cabinet_steel0.91 x 0.31 x 0.703,884back face, bottom centre
gws_bench_vice_1250.26 x 0.32 x 0.203,928bottom centre
gws_trolley_jack_2t1.59 x 0.40 x 0.879,888bottom centre
gws_axle_stands_pair0.64 x 0.30 x 0.433,944bottom centre
gws_cantilever_toolbox0.55 x 0.32 x 0.293,340bottom centre

Works in Studio with the House Starter

Buy once and you also get three garage room sets for the House Starter in Studio Build, laid out from these pieces: a garage workshop (shelving, workbench with vice and pegboard, wall cabinet and roller cabinet, all along the back wall), a tool wall (bench on a tool board, pegboard, toolbox, ladder, compressor) and a car-care corner (trolley jack, axle stands, toolbox, bins), each on a sealed concrete floor. Each has its own LODs and standing spots for Studio Scenes. Put them behind the Starter's garage door or anywhere on the floor plan with the back on a plain outer wall (no window behind or right beside it: the shelving, tool board and cabinets stand against it), or use the preset, then export the house as GLB or FBX. You need the House Starter to use them in Studio.

Technical details

Formats
GLB, FBX, OBJ, BLEND, PNG
Software
Blender, Unity, Unreal Engine, Godot, Maya, Cinema 4D, 3ds Max
Provenance
Procedural
AI training
prohibited
Polygon count
156916 tris
Rigged
No
Animated
No
PBR materials
Yes
Texture resolution
2k
UV unwrapped
Yes
Units
m

Version history

Latest version 1.3.0, released .

  1. 1.3.0

    1.3.0: Studio garages now have an LED batten light on the back wall that lights the room at night in Studio Scenes. The download files are unchanged. 1.2.0: Works in Studio. Three garage room sets for the House Starter (workshop, tool wall, car-care corner) laid out from the set's pieces, with LODs, standing spots for Scenes and a preset. The download files are unchanged.

  2. 1.2.0

    1.2.0: Works in Studio. Three garage room sets for the House Starter (workshop, tool wall, car-care corner) laid out from the set's pieces, with LODs, standing spots for Scenes and a preset. The download files are unchanged. Documentation tidy-up: README with the product name, version, licence and support details, and current product names. No changes to the models or files.

  3. 1.1.0

    Documentation tidy-up: README with the product name, version, licence and support details, and current product names. No changes to the models or files.

  4. 1.0.1

    File tidy-up: cleaner file metadata and notes; no changes to the models.

  5. 1.0.0

  • Pack (adds parts to a Starter)Studio-readyFiles validated
    • Interactive 3D preview

    Books and Shelf Decor Set: 24 Render-Ready PBR Models

    Pack for House Starter: Pack for House Starter: Modular Suburban House with Floors, Stair and Rooms

    300 creditsNo reviews yet
  • Pack (adds parts to a Starter)Studio-readyFiles validated
    • Interactive 3D preview

    Christmas Interior Decor Set: Fireplace, Garland, Wreaths, Stockings and Candles

    Pack for House Starter: Pack for House Starter: Modular Suburban House with Floors, Stair and Rooms

    • 2
    300 creditsNo reviews yet

Reviews

Own this asset? Sign in to review it.

No reviews yet. Owners can share how the asset worked for them.

    Questions & comments

    Sign in to ask the creator a question.

    No questions yet. Ask about formats, compatibility or licensing.