
- Interactive 3D preview
Petrol Station Forecourt Kit: Canopy, Fuel Pumps, Price Sign, Car Wash and Forecourt Props
Pack for Town Street Starter: Pack for Town Street Starter: Roads, Pavements and Street Furniture for Studio
- 1
A 14-piece car park and EV charging kit: a two-bay solar charging canopy, a rapid charger, an AC charging post and a wall box charger, a barrier with a 3.6 m arm, an entry terminal, a pay station, a height barrier, a speed bump and the posts, signs and stops that finish a car park. Baked PBR textures, three LODs and collision on every piece, and a demo car park.
UCX_ naming for Unreal), boxes fitted per partWorks in Unity, Unreal Engine and Godot (and anything that reads FBX or GLB). The README has import notes for each engine.
CONVENTIONS
Units: metres, real-world scale. Z-up in .blend; FBX/GLB exported Y-up (engine default).
Fronts face -Y in the .blend (forward in most engines after export).
Pivots: the bottom centre of each piece, on the ground (the canopy: centre of the covered area;
the barrier: centre of its cabinet, the arm runs along +X).
Charging bays (as in the demo scene):
Two canopies side by side at x = -3.0 and +3.0 m; each covers two 2.5 m bays between its columns
(columns at x = -2.5 and +2.5 m from its centre, y = +1.9 m, at the back). Clear height under the
beams: about 2.9 m at the back, 3.2 m at the front edge.
Chargers stand behind the bays at y = +3.35 m, between a canopy's columns; rubber wheel stops at
y = +2.05 m in each bay. Checked in Blender: the 21 placed pieces of the demo layout do not touch.
Entrance lane (3.6 m wide): barrier cabinet beside the lane with the arm across it, the entry terminal
island turned 90 degrees on the driver's side before it, the height barrier (3.88 m between posts,
2.1 m to the flap tips) further out and the speed bump across the lane inside.
LODs: LOD0, LOD1, LOD2 share UVs and textures. LOD1 drops small hardware (bolts, keys, flap
reflectors, panel bus bars); LOD2 also drops fine trims and is edge-collapsed where needed.
Collision: convex boxes (UCX_<piece>_NN inside <piece>.fbx, plus <piece>_collision.glb).
Materials: one baked PBR material per piece (512 px for the bollard, EV sign and wheel stop, 1024 px
for most props, 2048 px for the rapid charger and the canopy). The canopy downlights and lamp heads
use a separate emissive material (M_LampGlass); screens and status lights are baked into the piece's
maps with an emission map.
Maps: basecolor, roughness, metallic, normal (OpenGL, +Y), normal_directx, unity_metallic_smoothness,
emission (on the glowing pieces).
| Piece | Size (m) | Triangles LOD0 / LOD1 / LOD2 | Collision | Textures | Pivot |
|---|---|---|---|---|---|
| Rapid charger (twin DC outlets) | 1.60 × 0.72 × 1.98 | 4,476 / 2,460 / 1,222 | 48 (4 hulls) tris | 2048 px | bottom centre (centre of the plinth on the ground); screen faces -Y |
| AC charging post (two sockets) | 0.32 × 0.29 × 1.38 | 1,576 / 1,048 / 524 | 36 (3 hulls) tris | 1024 px | bottom centre (centre of the base plate on the ground); sockets face -Y and +Y |
| Wall box charger on pedestal | 0.45 × 0.32 × 1.31 | 2,352 / 1,292 / 645 | 48 (4 hulls) tris | 1024 px | bottom centre (centre of the base plate on the ground); charger faces -Y |
| Solar charging canopy, 5.8 x 5.6 m | 5.86 × 5.64 × 3.59 | 4,740 / 2,916 / 1,458 | 36 (3 hulls) tris | 2048 px | bottom centre of the covered area on the ground; columns at x = -2.5 and +2.5, y = +1.9 (back); open side and fascia at -Y; clear height 2.9 m at the back, 3.2 m at the front |
| Barrier with 3.6 m arm and rest | 3.93 × 0.57 × 1.05 | 1,326 / 982 / 490 | 48 (4 hulls) tris | 1024 px | bottom centre of the cabinet on the ground; the arm runs along +X at 0.9 m on the -Y side of the cabinet; rest post at x = 3.45 m |
| Pay station | 0.60 × 0.47 × 1.70 | 1,996 / 848 / 424 | 36 (3 hulls) tris | 1024 px | bottom centre (centre of the base plate on the ground); faces -Y |
| Entry terminal on kerbed island | 1.62 × 0.62 × 1.50 | 1,444 / 789 / 391 | 36 (3 hulls) tris | 1024 px | bottom centre (centre of the island on the ground); faces -Y (driver side); island runs along X |
| Height barrier, 4 m (2.1 m headroom) | 4.36 × 0.39 × 3.15 | 3,136 / 1,722 / 847 | 48 (4 hulls) tris | 1024 px | bottom centre between the posts on the ground; posts at x = -2.0 and +2.0; bar and roundel on the -Y face; 3.88 m clear between posts |
| Speed bump, 2.3 m | 2.32 × 0.50 × 0.06 | 1,536 / 640 / 288 | 12 tris | 1024 px | bottom centre on the ground; runs along X (across a lane), 0.5 m deep, 55 mm high |
| Fold-down security bollard | 0.24 × 0.27 × 0.94 | 1,060 / 582 / 290 | 24 (2 hulls) tris | 512 px | bottom centre (centre of the base plate on the ground); hinge along X, folds toward +Y |
| Parking sign with arrow plate | 0.60 × 0.24 × 2.62 | 836 / 644 / 356 | 36 (3 hulls) tris | 1024 px | bottom centre (centre of the base plate on the ground); sign faces -Y |
| EV bay sign | 0.40 × 0.24 × 2.22 | 680 / 488 / 288 | 36 (3 hulls) tris | 512 px | bottom centre (centre of the base plate on the ground); sign faces -Y |
| Rubber wheel stop, 1.65 m | 1.65 × 0.15 × 0.11 | 420 / 324 / 132 | 12 tris | 512 px | bottom centre on the ground; runs along X |
| Lamp column, 6 m twin head | 2.88 × 0.40 × 6.06 | 1,008 / 728 / 364 | 36 (3 hulls) tris | 1024 px | bottom centre (centre of the base plate on the ground); arms along X |
Blender check (Blender 5.2.1): every shipped FBX and GLB file was re-imported (98 of 98 loaded with their meshes); in the demo layout none of the 21 placed pieces touch each other.
The download has 14 models; Studio adds 14 street pieces built from them (3 of them grouped layouts).
Buy once and you also get fourteen street pieces for the Town Street Starter in Studio Build: a whole EV charging block (two solar canopies over four bays with three chargers), a single canopy bay with a rapid charger, a car park entry with barrier arm and ticket terminal, a rapid charger, an AC post, a wall box, a pay station, a height barrier, a speed bump, a fold-down bollard, a parking sign, an EV bay sign, a wheel stop and a lamp column, all from these models with their own LODs. Place them on or beside a street, or save one and reuse it, then export as GLB or FBX. You need the Town Street Starter to use them in Studio. They are static set dressing: the barrier arm and cables don't move. Add one of the Starter's driveways in front of the charging bays so cars have a way in; the bays stand on the ground beside the street (bay paint is not included). Pairs with the Petrol Station Forecourt Kit.

Pack for Town Street Starter: Pack for Town Street Starter: Roads, Pavements and Street Furniture for Studio

Pack for Town Street Starter: Pack for Town Street Starter: Roads, Pavements and Street Furniture for Studio

Pack for Town Street Starter: Pack for Town Street Starter: Roads, Pavements and Street Furniture for Studio

Pack for Town Street Starter: Pack for Town Street Starter: Roads, Pavements and Street Furniture for Studio
Own this asset? Sign in to review it.
No reviews yet. Owners can share how the asset worked for them.
Sign in to ask the creator a question.
No questions yet. Ask about formats, compatibility or licensing.