Skip to content
AssetLoom
Interactive 3D preview (reduced-detail model, 79,372 triangles · 56 × 60 × 6.9 m). The downloadable files are the full-resolution originals.

Description

Town Street Starter

A Studio Starter that builds a whole street in one build, the same way the House Starter builds a house. You set the street; the Starter lays out every road section, junction, pavement and piece of street furniture.

Set the street (Build > Street)

  • Shape: straight (20 to 100 m), corner, T-junction or crossroads (arms up to 40 m), a road network, or a single piece
  • Road networks: draw road on a 20 m grid, on the map or in the 3D view; each cell becomes a section, corner, T-junction or crossroads from its neighbours
  • Zebra crossings every so many sections, with dropped kerbs and tactile paving
  • Driveways: a dropped kerb and ramped crossover on either pavement of a section, with a block-paved drive on the plot behind it; pick them from a list or click the kerbs on the map (green fits, red says why not)
  • Rows on one or both pavements: street lamps at the kerb, trees mid-pavement, benches with bins at the back, bollards at the crossings
  • A bus stop with a shelter and stop flag, traffic signals on a junction, a railing or hedge along the back (from a pack)
  • Pieces of your own, placed in 3D or on the map: click to put down a fountain, cones, barriers or another bench, drag and turn them (15 degree steps), paint a line of them, with guides that snap to the pavement and keep their spacing. Nothing can overlap or sit across a kerb.
  • Grass that grows the plot: lay the 4 x 4 m grass tile (or a pack's lawns) out from the street, then put benches on it, or a park or funfair from their packs (sold separately).

Pieces keep to their own lanes on the pavement: lamps at the kerb, trees mid-pavement and at least 4 m from a lamp, benches at the back. Rows keep clear of crossings, and the bus stop moves off a crossing.

Parts and packs

The Starter has a town road, an LED street lamp, a park bench, a slatted bin, a steel bollard, a bus shelter (recolour its frame) and a traffic signal, plus single pieces (hydrant, cabinet, signs, cone, barrier) and a grass tile. Add-on packs add more choices to the same slots: the Park Pack brings oak, lime, birch and pine trees, heritage lamps, park railings and hedges, lawns and a fountain.

In Studio Scenes (in testing, coming soon)

A saved street is one set piece: people, cars and animals walk and drive on it. Copy puts the next street on at its far end, so a few copies make a long street, and junctions join on.

Export

GLB or FBX for Unity, Unreal and Godot: nodes for the road, lamps, trees and furniture, LOD0 to LOD2, convex colliders and lightmap UVs.

Good to know

  • The houses in the previews are House Starter builds with the Porch & Garden Pack, both sold separately. The background ground and sky are render-only; the grass patches are the Starter's grass tile.
  • Lane markings are UK-style (left-hand traffic); a right-hand T-junction (stop lines on the right-hand halves) is included for right-hand streets. Signs and the poster carry no words or logos.
  • Version 2.3 adds driveways and a Residential preset. Version 2.2 adds road networks, the grass tile, and placing in 3D. Version 2.0 turned the 1.x single pieces into a street builder. Owners of 1.x keep their version and their saved pieces.

Technical details

Formats
GLB, WEBP, JSON, TXT
Software
Blender
Provenance
Procedural
AI training
prohibited
Engine
unity, unreal-engine, godot
Engine version
Unity 2022.3 LTS+, Unreal Engine 5.3+, Godot 4.2+ (via the Studio Build export with authored LODs and colliders; checked by re-importing the exports in Blender, not tested inside the engines)
LODs included
Yes
Collision meshes
Yes
Polygon budget
7550 tris
Target platform
pc

Add-on packs for this kit

More parts for Town Street Starter in Studio Build. Each pack you own adds its parts to the same builder.

Version history

Latest version 2.5.0, released .

  1. 2.5.0

    File tidy-up: cleaner file metadata and notes; no changes to the models.

  2. 2.4.0

    2.4.0: ready for right-hand (US) traffic: adds a right-hand T-junction with its stop lines on the right-hand halves, for Studio to use on right-hand streets, and the traffic signal's red, amber and green lenses are now their own named meshes (dark when off), so Scenes can light the one that is on. Same parts, same ids.

  3. 2.3.2

    2.3.2: the bus shelter's roof rests on its frame. 2.3.1: the two-sided driveway section shows in full in Build. 2.3: driveways: road sections with a dropped-kerb crossover on one pavement or both, a block-paved plot driveway behind each, and a Residential preset; Build places them from a list or on the street map (green fits, red says why not).

  4. 2.3.1

    2.3.1: the two-sided driveway section shows in full in Build. 2.3: driveways: road sections with a dropped-kerb crossover on one pavement or both, a block-paved plot driveway behind each, and a Residential preset; Build places them from a list or on the street map (green fits, red says why not).

  5. 2.3.0

    2.3: driveways: road sections with a dropped-kerb crossover on one pavement or both, a block-paved plot driveway behind each, a Residential street preset; Build places them from a list or on the street map. 2.2: road networks drawn on a 20 m grid (a road stub module joins their junctions), a 4 x 4 m grass tile, a Small town preset; in Build, place and turn pieces in the 3D view, guides, paint lines and fill areas, and grass that grows the plot.

Show 6 older versions
  1. 2.2.0

    2.2: road networks drawn on a 20 m grid (a road stub module joins their junctions), a 4 x 4 m grass tile, a Small town preset; in Build, place and turn pieces in the 3D view, guides, paint lines and fill areas, and grass that grows the plot.

  2. 2.1.0

    2.1: place pieces by hand on the street map in Build (a fountain, lawns, cones, more benches), checked so nothing overlaps or sits across a kerb.

  3. 2.0.0

    2.0: builds whole streets. Set the shape (straight up to 100 m, corner, T-junction, crossroads) and the Starter lays out road sections, junctions, crossings, lamps, trees, benches, bins, bollards, a bus stop and signals; add-on packs add choices to each slot. A new corner junction. Single pieces stay available as the street's One piece shape. Owners of 1.x keep their version.

  4. 1.2.0

    Fixes before release: the bus shelter's roof sits on a beam round the posts, the seat stands on legs from a rail between the back posts, the poster case reaches the ground between the posts, and the stop flag hangs beside its pole on brackets. Drain grates show again in the street sections (the road surface now sits 0.04 m above the ground). The T-junction has a stop line only on the lane coming in. Street lamp height corrected to 6.5 m.

  5. 1.1.0

    Fixes before release: the bus shelter's roof sits on a beam round the posts, the seat stands on legs from a rail between the back posts, the poster case reaches the ground between the posts, and the stop flag hangs beside its pole on brackets. Drain grates show again in the street sections (the road surface now sits 0.04 m above the ground). The T-junction has a stop line only on the lane coming in. Street lamp height corrected to 6.5 m.

  6. 1.0.0

  • Pack (adds parts to a Starter)Studio-readyFiles validated
    • Interactive 3D preview

    Modular Street Kit: Roads, Pavements, Crossings and Street Furniture

    Pack for Town Street Starter: Pack for Town Street Starter: Roads, Pavements and Street Furniture for Studio

    • 1
    300 creditsNo reviews yet
  • Starter (a complete Studio kit)Studio-readyFiles validated
    • Interactive 3D preview

    High Street Shops Starter: Modular Shops and Shopfronts

    GLB · JSON · WEBP · TXT · JPG

    • 4
    200 creditsNo reviews yet
  • Pack (adds parts to a Starter)Studio-readyFiles validated
    • Interactive 3D preview

    Park Pack for Town Street Starter: Trees, Lawns, Fountain, Railings

    Pack for Town Street Starter: Pack for Town Street Starter: Roads, Pavements and Street Furniture for Studio

    • 2
    100 creditsNo reviews yet
  • Pack (adds parts to a Starter)Studio-readyFiles validated
    • Interactive 3D preview

    Funfair Pack for Town Street Starter: Carousel, Ferris Wheel, Helter-Skelter, Stalls

    Pack for Town Street Starter: Pack for Town Street Starter: Roads, Pavements and Street Furniture for Studio

    • 1
    150 creditsNo reviews yet

Reviews

Own this asset? Sign in to review it.

No reviews yet. Owners can share how the asset worked for them.

    Questions & comments

    Sign in to ask the creator a question.

    No questions yet. Ask about formats, compatibility or licensing.