
- Interactive 3D preview
Car Park & EV Charging Kit: Solar Canopy, Chargers, Barriers, Pay Station and Car Park Props
Pack for Town Street Starter: Pack for Town Street Starter: Roads, Pavements and Street Furniture for Studio
- 1
A 16-piece petrol station forecourt kit: a 13 x 9 m canopy with lit downlights, pump islands, twin-sided fuel dispensers with nozzles on looped hoses, a lit price sign pylon, a roller car wash, air and water, a car vacuum and the bins, cages, racks and safety kit that dress a real forecourt. Baked PBR textures, three LODs and collision on every piece, and a demo forecourt.
UCX_ naming for Unreal), boxes and hulls fitted per partWorks in Unity, Unreal Engine and Godot (and anything that reads FBX or GLB). The README has import notes for each engine.
CONVENTIONS
Units: metres, real-world scale. Z-up in .blend; FBX/GLB exported Y-up (engine default).
Fronts face -Y in the .blend (forward in most engines after export).
Pivots: the bottom centre of each piece, on the ground.
Forecourt layout (as in the demo scene):
Canopy at the origin; its two columns stand at x = -3.25 and +3.25 m, 4.96 m clear under the soffit.
Pump island: turn it 90 degrees about Z and centre it on a column (the column stands on its centre seat).
Cars then drive through along Y on both sides of each island.
Dispensers: two per island, on the foot plates at x = -1.40 and +1.40 m along the island, 0.186 m up,
with the island's heading. Hoses loop out at the dispenser's ends and clear the canopy column.
Checked in Blender: dispensers, island and canopy in this layout touch only at the foot plates.
Wheel stop: 1.8 m, runs along X; place it about 1.2 m in from the end of a parking bay.
LODs: LOD0, LOD1, LOD2 share UVs and textures. LOD1 drops small hardware (bolts, keys, nozzles,
hinges); LOD2 also drops fine trims and is edge-collapsed where needed.
Collision: convex boxes and hulls (UCX_<piece>_NN inside <piece>.fbx, plus <piece>_collision.glb).
Materials: one baked PBR material per piece (512 px for the bump post, 1024 px for small props, 2048 px
for the canopy, dispenser, island, sign, car wash, cage, freezer and rack). The canopy downlight lenses
use a separate emissive material (M_LampGlass); price digits, pump displays and the freezer glass are
baked into the piece's maps (emission map included where a piece glows).
Maps: basecolor, roughness, metallic, normal (OpenGL, +Y), normal_directx, unity_metallic_smoothness,
emission (on the glowing pieces).
| Piece | Size (m) | Triangles LOD0 / LOD1 / LOD2 | Collision | Textures | Pivot |
|---|---|---|---|---|---|
| Fuel dispenser (twin-sided, four nozzles) | 1.84 × 0.54 × 2.36 | 7,484 / 5,812 / 2,906 | 48 (4 hulls) tris | 2048 px | bottom centre (centre of the plinth on the ground); stands on a pump island foot plate (x = -1.40 or +1.40 m along the island, 0.186 m up), same heading as the island; faces -Y and +Y |
| Pump island, 6.4 m | 6.41 × 1.22 × 1.26 | 3,052 / 1,678 / 823 | 36 (3 hulls) tris | 2048 px | bottom centre (centre of the island on the ground); runs along X; dispensers stand on the foot plates at x = -1.40 and +1.40 m (plate top 0.186 m); a canopy column stands at its centre |
| Forecourt canopy, 13 x 9 m | 13.03 × 9.04 × 6.00 | 3,272 / 1,798 / 848 | 36 (3 hulls) tris | 2048 px | bottom centre (between the two column feet on the ground); the columns stand at x = -3.25 and +3.25 m; turn a pump island 90 degrees and centre it on each column (cars drive through along Y) |
| Price sign pylon, 5.5 m | 1.90 × 0.70 × 5.48 | 2,900 / 1,594 / 651 | 36 (3 hulls) tris | 2048 px | bottom centre (centre of the base on the ground); faces -Y and +Y |
| Air and water tower | 1.00 × 0.48 × 1.66 | 3,232 / 1,775 / 874 | 36 (3 hulls) tris | 1024 px | bottom centre (centre of the base plate on the ground); panel faces -Y |
| Car vacuum station | 0.76 × 1.06 × 1.98 | 3,068 / 1,686 / 839 | 36 (3 hulls) tris | 1024 px | bottom centre (centre of the base on the ground); panel faces -Y |
| Roller car wash gantry | 4.70 × 4.02 × 3.77 | 28,284 / 15,556 / 7,762 | 72 (6 hulls) tris | 2048 px | bottom centre (centre between the rails on the ground); the car drives through along Y, entry at -Y |
| Gas bottle cage with seven cylinders | 1.70 × 0.92 × 1.88 | 8,080 / 4,444 / 2,880 | 12 tris | 2048 px | bottom centre (centre of the cage on the ground); doors face -Y |
| Ice merchandiser (two-door) | 1.30 × 0.83 × 1.95 | 3,076 / 1,690 / 652 | 12 tris | 2048 px | bottom centre (centre of the base on the ground); doors face -Y |
| Oil and screenwash rack | 1.24 × 0.49 × 1.62 | 5,756 / 3,164 / 1,567 | 12 tris | 2048 px | bottom centre (centre of the rack on the ground); front faces -Y |
| Service bin with towel dispenser and squeegee | 0.81 × 0.47 × 1.66 | 1,096 / 602 / 299 | 36 (3 hulls) tris | 1024 px | bottom centre (centre of the bin on the ground); bin mouth faces -Y |
| Spill kit bin | 1.03 × 0.66 × 0.85 | 1,064 / 584 / 290 | 12 tris | 1024 px | bottom centre (centre of the bin on the ground); front faces -Y |
| Fire point with two extinguishers | 0.72 × 0.40 × 1.55 | 1,668 / 916 / 454 | 24 (2 hulls) tris | 1024 px | bottom centre (centre of the base on the ground); faces -Y |
| Bump post (bollard) | 0.32 × 0.32 × 1.14 | 1,472 / 808 / 448 | 44 tris | 512 px | bottom centre (centre of the collar on the ground) |
| Wheel stop, 1.8 m | 1.80 × 0.23 × 0.12 | 220 / 156 / 60 | 12 tris | 1024 px | bottom centre (centre of the stop on the ground); runs along X |
| Tank fill points | 2.00 × 1.10 × 0.06 | 2,604 / 1,432 / 688 | 12 tris | 1024 px | bottom centre (centre of the apron on the ground) |
Blender check (Blender 5.2.1): every shipped FBX and GLB file was re-imported (112 of 112 loaded with their meshes); in the forecourt layout the dispensers clear the canopy columns and each other (0 overlaps) and sit on the island foot plates.
Buy once and you also get fourteen street pieces for the Town Street Starter in Studio Build: a whole forecourt (canopy with downlights, two pump islands and four pumps), a pump island with two pumps, the price sign, a roller car wash, air and water, a car vacuum, a gas bottle cage, an ice freezer, an oil rack, a forecourt bin, a spill kit, a fire point, a bump post and a wheel stop, all from these models with their own LODs. Place them on or beside a street, or save one and reuse it, then export as GLB or FBX. You need the Town Street Starter to use them in Studio. They are static set dressing: the pumps and car wash don't move. Add one of the Starter's driveways in front of the forecourt so cars have a way in.

Pack for Town Street Starter: Pack for Town Street Starter: Roads, Pavements and Street Furniture for Studio

Pack for Town Street Starter: Pack for Town Street Starter: Roads, Pavements and Street Furniture for Studio

Pack for Town Street Starter: Pack for Town Street Starter: Roads, Pavements and Street Furniture for Studio

Pack for Town Street Starter: Pack for Town Street Starter: Roads, Pavements and Street Furniture for Studio
Own this asset? Sign in to review it.
No reviews yet. Owners can share how the asset worked for them.
Sign in to ask the creator a question.
No questions yet. Ask about formats, compatibility or licensing.