
- Interactive 3D preview
Christmas Market Stall Kit: Timber Chalet Stalls, Snow Caps, String Lights, Garlands and Festive Props
Pack for Town Street Starter: Pack for Town Street Starter: Roads, Pavements and Street Furniture for Studio
- 2
A 24-piece modular kit for underground mines: rock tunnels, a vertical shaft, timbering, narrow-gauge track, a mine cart and the props to dress them, on a 5 m grid with every open tunnel end sharing one crack-free profile. Baked PBR textures, three LODs and collision on every piece.
UCX_ hulls on props (Unreal), mesh colliders for the concave rock tilesWorks in Unity, Unreal Engine and Godot (and anything that reads FBX or GLB). The README has a step-by-step guide to building a mine, plus import and grid-snap notes for each engine.
CONVENTIONS
Units: metres, real-world scale. Z-up in .blend; FBX/GLB exported Y-up (engine default).
Grid: 5 m tiles; levels every 4 m. Timbering, track and props sit on a 2.5 m sub-grid inside the tiles.
Rock tiles (tunnel_*, shaft_section): pivot at the tile corner on the tunnel floor; a tile fills
x 0..5, y 0..5 and its rock block z -0.4..3.6, 4.0 m tall (tunnel_slope: z -0.4..4.6, 5.0 m
tall, because its floor rises 1 m). shaft_section uses the same corner pivot and the same z -0.4..3.6
block, so stacked at z = 4, 8, ... it continues the tunnel_shaft block with no gap. The outer rock mass runs
0.5 m past each closed side of the tile (never past an open end), so the walls have real rock depth; next to
another tile the two hidden rock masses simply overlap. Rotate in 90 degree steps;
to keep a rotated tile in the same cell, move its pivot to the matching corner (90: +5 in x,
180: +5 in x and y, 270: +5 in y).
Open ends: every open tunnel end is centred on a tile edge (2.5 m from the corners) and uses ONE cut
profile: floor 2.8 m wide, walls about 3 m apart, crown 3.0 m high. All open ends, at LOD0, LOD1 and
LOD2, follow the same outline (checked); some ends carry a few extra vertices lying exactly on that
outline, so ends meet without a gap. If your engine shows hairline sparkles at T-junctions, weld the
seam vertices or merge the tiles.
Shaft ends (top of tunnel_shaft, both ends of shaft_section) share one rounded-square ring (2.2 m).
tunnel_corner turns from the -X end (0, 2.5) to the +Y end (2.5, 5) round a 2.5 m radius.
tunnel_t: ends at x = 0, x = 5 and y = 5. tunnel_cross: all four edges. tunnel_end: open at x = 0.
tunnel_slope: S-curve incline, level at both ends, floor rises 1 m from x = 0 to x = 5 (so four
inclines climb one 4 m level; the tiles between sit on a 1 m vertical sub-grid).
tunnel_shaft + shaft_section: the shaft (centre 2.5, 2.5) rises through the block top; stack
shaft_section at z = 4, 8, ... at the same x, y. Put shaft_lining at the same transform as each
shaft_section (corner posts, a square set every metre, ladder way).
Rock surface: the walls never come inside the cut profile, so props placed for the profile never
clip them.
Timbering: timber_set pivots on the tunnel centre line on the floor (posts at +/-1.2 m, cap top
2.57 m); place sets every 2.5 m along a tunnel. lagging_bay pivots on the floor on a set's centre line;
its boards sit on the caps (z 2.58 m) and run +X to the next set 2.5 m on. timber_set_broken uses the same pivot.
Track: 600 mm gauge, rail top 0.122 m above the floor. rail_straight (2.5 m) runs +X from the track
centre at its start; rail_curve starts at (0, 0) heading +X and ends at (2.5, 2.5) heading +Y (matches
tunnel_corner: put it at (0, 2.5) in the tile); rail_slope runs 5 m and rises 1 m (matches
tunnel_slope); rail_buffer is a 2.5 m straight ending in a buffer stop. Rail ends match exactly.
Cart: mine_cart_body pivots on the rail-top plane at its centre; put two mine_cart_wheelset pieces
at (+/-0.36, 0, 0.15) in the body's space (pivot = axle centre, spin about Y).
lantern: pivot at the bail grip (x_hand socket, or hang it on the lamp nail of a timber set at set
space (-0.17, 0.35, 2.394), turned 90 degrees). ore_pile, supply_crate, ladder: bottom centre.
LODs: LOD0, LOD1 and LOD2 share each piece's UVs and textures. Rock tiles keep the same open-end
outline at every LOD. Small parts (nails, spikes, rivets, ballast) drop at LOD1/LOD2; other props use
authored LODs.
Collision: props use convex boxes and hulls (UCX_<piece>_NN inside <piece>.fbx, plus
<piece>_collision.glb). Rock tiles are concave, so they ship a mesh collider (= LOD2) as
<piece>_collision.fbx/.glb: use it as complex/static mesh collision.
Materials per piece: one baked PBR material (rock tiles 4096 px base colour and normal with
2048 px roughness, metallic and Unity maps; timber sets the same 4096/2048 px; 2048 px for the
lagging bay, shaft lining, cart body and ore heap; 1024 px for the rest) plus flat slots for the dark outer rock block and the lantern
glass and flame. Rock tiles use UVs laid out around the cut and along the tunnel, so texel density
is even and the texture lines up with the cut. Maps: basecolor, roughness, metallic, normal
(OpenGL, +Y), normal_directx, unity_metallic_smoothness.
| Piece | Size (m) | Triangles LOD0 / LOD1 / LOD2 | Collision | Textures | Pivot |
|---|---|---|---|---|---|
| Tunnel straight, 5 m | 5.00 × 6.00 × 4.00 | 37,080 / 5,168 / 2,776 | 2,776 (mesh) tris | 4096 px | tile corner on the tunnel floor (x = 0, y = 0, z = 0); tile x 0..5, y 0..5, rock block z -0.4..3.6; the rock mass runs 0.5 m past closed sides |
| Tunnel corner, 90 degree bend | 5.50 × 5.50 × 4.00 | 23,800 / 4,564 / 2,634 | 2,634 (mesh) tris | 4096 px | tile corner on the tunnel floor (x = 0, y = 0, z = 0); tile x 0..5, y 0..5, rock block z -0.4..3.6; the rock mass runs 0.5 m past closed sides |
| Tunnel T junction | 5.00 × 5.50 × 4.00 | 40,446 / 7,776 / 4,820 | 4,820 (mesh) tris | 4096 px | tile corner on the tunnel floor (x = 0, y = 0, z = 0); tile x 0..5, y 0..5, rock block z -0.4..3.6; the rock mass runs 0.5 m past closed sides |
| Tunnel crossroads | 5.00 × 5.00 × 4.00 | 43,630 / 9,692 / 6,776 | 6,776 (mesh) tris | 4096 px | tile corner on the tunnel floor (x = 0, y = 0, z = 0); tile x 0..5, y 0..5, rock block z -0.4..3.6; the rock mass runs 0.5 m past closed sides |
| Tunnel dead end (working face) | 5.50 × 6.00 × 4.00 | 35,036 / 5,902 / 3,878 | 3,878 (mesh) tris | 4096 px | tile corner on the tunnel floor (x = 0, y = 0, z = 0); tile x 0..5, y 0..5, rock block z -0.4..3.6; the rock mass runs 0.5 m past closed sides |
| Tunnel incline, +1 m over 5 m | 5.00 × 6.00 × 5.00 | 37,080 / 5,168 / 2,776 | 2,776 (mesh) tris | 4096 px | tile corner on the tunnel floor (x = 0, y = 0, z = 0); tile x 0..5, y 0..5, rock block z -0.4..4.6; the rock mass runs 0.5 m past closed sides |
| Tunnel cave-in with rubble and fallen timbers | 5.00 × 6.00 × 4.00 | 79,351 / 26,162 / 13,297 | 13,297 (mesh) tris | 4096 px | tile corner on the tunnel floor (x = 0, y = 0, z = 0); tile x 0..5, y 0..5, rock block z -0.4..3.6; the rock mass runs 0.5 m past closed sides |
| Tunnel with a shaft opening | 5.00 × 6.00 × 4.00 | 36,938 / 5,488 / 3,118 | 3,118 (mesh) tris | 4096 px | tile corner on the tunnel floor (x = 0, y = 0, z = 0); tile x 0..5, y 0..5, rock block z -0.4..3.6; the rock mass runs 0.5 m past closed sides |
| Vertical shaft section, 4 m | 6.00 × 6.00 × 4.00 | 15,028 / 2,128 / 1,168 | 1,168 (mesh) tris | 4096 px | tile corner on the tunnel floor (x = 0, y = 0, z = 0); tile x 0..5, y 0..5, rock block z -0.4..3.6; the rock mass runs 0.5 m past closed sides |
| Timber set (posts, cap, foot sills, iron dogs, lamp nail) | 0.39 × 2.70 × 2.64 | 11,640 / 6,402 / 3,200 | 36 (3 hulls) tris | 4096 px | centre of the set on the tunnel floor (x = 0, y = 0 is the tunnel centre line); posts at y = +/-1.2 m, cap top 2.57 m; place every 2.5 m along a tunnel |
| Broken timber set (snapped cap, leaning post, prop) | 0.50 × 2.71 × 2.64 | 14,992 / 8,244 / 4,122 | 112 (5 hulls) tris | 4096 px | centre of the set on the tunnel floor, as timber_set |
| Junction post (hewn corner post, head block, sill) | 0.40 × 0.30 × 2.64 | 4,564 / 2,510 / 1,254 | 24 (2 hulls) tris | 2048 px | bottom centre of the post on the floor; in tunnel_t / tunnel_cross put it at (HC - 1.15, HC + 1.15) = (1.35, 3.65) for the (0, 5) corner (mirror for the others), turned 45 degrees |
| Lagging bay (8 lagging boards) | 2.76 × 2.26 × 0.10 | 9,808 / 5,394 / 2,696 | 12 tris | 2048 px | on the centre line at the first set (x = 0) on the floor; boards lie on the caps (2.57 m) and run +X to the next set at x = 2.5 |
| Shaft lining with ladder way | 2.15 × 2.14 × 4.00 | 61,932 / 34,062 / 17,030 | 48 (4 hulls) tris | 2048 px | same tile corner as shaft_section (place both at the same point) |
| Timber ladder, 4 m | 0.60 × 0.13 × 4.00 | 7,640 / 4,202 / 2,100 | 12 tris | 1024 px | bottom centre between the rails; rungs run along X |
| Rail track, straight 2.5 m | 2.50 × 1.36 × 0.17 | 5,596 / 3,076 / 1,537 | 12 tris | 1024 px | track centre at the start (x = 0, y = 0) on the floor; runs +X; rail top 0.122 m |
| Rail track, 90 degree curve | 3.20 × 3.20 × 0.17 | 8,428 / 4,634 / 2,317 | 48 (4 hulls) tris | 1024 px | track centre at the start (0, 0) heading +X; curves left round (0, 2.5) and ends at (2.5, 2.5) heading +Y |
| Rail track, incline 5 m | 5.00 × 1.36 × 1.16 | 11,164 / 6,139 / 3,068 | 60 (5 hulls) tris | 1024 px | track centre at the low end (0, 0, 0); runs +X up to (5, 0, 1) |
| Rail track with buffer stop | 2.79 × 1.36 × 0.67 | 13,832 / 7,607 / 3,803 | 24 (2 hulls) tris | 1024 px | track centre at the start (x = 0, y = 0) on the floor; buffer face at x = 1.98 |
| Mine cart body (steel hopper) | 1.83 × 0.98 × 0.87 | 21,456 / 11,800 / 5,900 | 20 tris | 2048 px | centre on the rail-top plane (z = 0 at the rail top); wheelsets go at (+/-0.36, 0, 0.15) |
| Mine cart wheelset | 0.36 × 0.78 × 0.36 | 3,616 / 1,988 / 994 | 36 tris | 1024 px | axle centre (spin about Y); tread centres at y = +/-0.3, flanges inside |
| Miner's oil lantern | 0.15 × 0.15 × 0.35 | 2,288 / 1,258 / 628 | 28 tris | 1024 px | grip point at the top of the bail (x_hand socket); to hang it on a timber set's lamp nail put it at set space (-0.17, 0.35, 2.394), turned 90 degrees |
| Ore heap | 1.93 × 1.49 × 0.83 | 27,930 / 15,360 / 7,678 | 10 tris | 2048 px | bottom centre |
| Supply crate | 0.91 × 0.55 × 0.49 | 1,900 / 1,516 / 758 | 12 tris | 1024 px | bottom centre |
File check: every shipped FBX and GLB file was re-imported (178 of 178 loaded with their meshes); every open tunnel end and shaft end follows the same outline at all three LODs (extra vertices only on the outline); rail ends match on the straight, curve, incline and buffer; timber sets, lagging, the shaft lining, the cart and its wheelsets, the lantern and the props were tested in place for intersections.
AI-assisted texture reference; all meshes are AssetLoom's own.
Latest version 1.4.0, released .
1.4.0
Documentation tidy-up: README with the product name, version, licence and support details, and current product names. No changes to the models or files.
1.3.1
File tidy-up: cleaner file metadata and notes; no changes to the models.
1.3.0
Cave-in blocks and loose rubble: rougher fracture faces and chipped corners instead of clean flat facets, and no streaks on the block sides. Ore heap: brassy sulphide bands across the chunks instead of a silvery, foil-like sheen. Same 5 m grid, piece names, pivots and open ends, so saved layouts load unchanged.
1.2.0
Rock tiles: no straight gutter or kerb line along the wall foot near tile joints (the ragged foot now carries on through every joint) and shallower floor dips at the foot; a cleaner rim where the tunnel roof turns up into the shaft (no jagged fringe). Ore heap: subtler brassy sulphide streaks instead of blotchy patches. Fixed small black patches in the T-junction crown and the cave-in roof on the lower LODs. Same 5 m grid, piece names, pivots and open ends, so saved layouts load unchanged.
1.1.0
Rock tiles: smoother junction corners (no vertical groove or crease where a T or crossroads branch meets the main drive), a ragged wall foot instead of a straight kerb strip, deeper trodden floor relief, more relief on the dead-end working face, rougher shaft collar; cave-in blocks with rough fracture faces and lumpier scree; ore chunks with visible brassy veins; fixed one black face on the straight tile's LOD2. Same 5 m grid, piece names, pivots and open ends, so saved layouts load unchanged.
1.0.0

Pack for Town Street Starter: Pack for Town Street Starter: Roads, Pavements and Street Furniture for Studio

FBX · GLB · PNG · BLEND

Pack for Town Street Starter: Pack for Town Street Starter: Roads, Pavements and Street Furniture for Studio

GLB · FBX · OBJ · BLEND · PNG
Own this asset? Sign in to review it.
No reviews yet. Owners can share how the asset worked for them.
Sign in to ask the creator a question.
No questions yet. Ask about formats, compatibility or licensing.