Skip to content
AssetLoom
Interactive 3D preview (reduced-detail model, 72,908 triangles · 8.4 × 6.2 × 5.1 m). The downloadable files are the full-resolution originals.

Description

A 21-piece dungeon traps kit for dungeon crawlers, action-adventure and horror games: trap floor tiles, walls and ceiling mechanisms on a 2 m grid, each split into a fixed frame and a moving part with its pivot on the motion axis, ready to animate in your engine. Worn PBR stone, rusted iron and tarnished steel, three LODs and collision on every piece.

What's included

  • Floor tiles, 2 x 2 m (5): plain flagstones, spike trap (perforated iron cover over a stone-lined pit), pressure plate, saw blade slot, trapdoor over a 2 m stone shaft
  • Moving parts (8): spike bed (25 forged spikes), iron-rimmed pressure plate, hooked-tooth saw blade with set teeth and clamping collars, trapdoor leaf (use two), lever handle, pendulum with a socketed crescent blade and counterweight, portcullis, coursed stone crusher block bound in riveted iron with 16 spikes
  • Walls and mounts (5): dungeon wall, dart trap wall with four bronze nozzles, wall lever mount, pendulum ceiling mount, crusher ceiling housing with corner guides and chain sheaves
  • Props (3): dart, jaw trap set (open) and sprung (closed) with chain and stake (files bear_trap_open / bear_trap_closed)
  • Formats: FBX and GLB per piece (LOD0, LOD1, LOD2 and collision), PNG texture sets, the Blender source and a demo trap room (.blend and .glb)

Specs

  • Real-world scale in metres on a 2 m grid, matching our Low-Poly Dungeon Kit (3 m walls; the portcullis covers its 1.2 x 2.3 m doorway)
  • 180 to 17,182 triangles per piece at LOD0 (101,368 for all 21); LOD1 and LOD2 about 43% and 25% of that across the kit
  • Travel set up for one-channel animation: spikes rise 0.62 m, the plate sinks 3 cm, trapdoor leaves drop 90 degrees, the lever throws +/-40 degrees, the pendulum swings +/-60 degrees, the portcullis lifts 2.4 m, the crusher drops 1.3 m in its guides
  • One baked PBR material per piece, up to 2K: base colour, roughness, metallic, normal (OpenGL) and Unity metallic-smoothness
  • Worn flagstones and wall blocks with grime, damp streaks and a little moss; black iron with chipped paint and rust; steel spikes and blades with tarnish and brighter worn edges; bronze nozzles with verdigris
  • Convex collision hulls (UCX_ naming for Unreal): one per piece, two for the pendulum and the jaw traps, and box hulls for the trapdoor tile so its shaft stays open
  • Lever handle with a documented grip point for a hand socket

Engines

Works in Unity, Unreal Engine and Godot (and anything that reads FBX or GLB). The README has placement, import and animation notes for each engine.

Good to know

  • Static meshes: no animations, sounds, VFX or trap scripts. You animate the moving parts and add the trigger logic.
  • Every moving part clears its frame at rest and at full travel.
  • The jaw trap comes as two separate poses (set and sprung), not a hinged rig.
  • Collision hulls are convex, so they fill gaps between bars and spikes and cover the slot and pit tops; use your own triggers for damage.
  • The crusher's short chains are fixed to the block, and the raised portcullis needs 2.4 m of space above the doorway.
  • The ceiling beams and doorway stones in the preview scenes are scene dressing, not included.
  • LOD1 and LOD2 share LOD0's UVs and textures; rivets and bolt heads lose shape at LOD2, and the portcullis bars thin out at LOD2.
  • Textures are 2K at most per piece.
  • The .blend source and demo scene need Blender 5.2 or later; FBX and GLB work in any engine.
  • One stone and metal variant per piece in this version.
CONVENTIONS
  Units: metres, real-world scale. Z-up in .blend; FBX/GLB exported Y-up (engine default).
  Grid: 2 m, matching AssetLoom's Low-Poly Dungeon Kit.
  Floor tiles: 2 x 2 m, pivot at the grid corner, tile spans x 0..2, y 0..2, walkable top at z = 0
    (stone 0.2 m thick; the spike pit goes 0.86 m down, the trapdoor shaft 2 m).
  Walls: pivot at the segment start on the grid line, run +X to x = 2 m, 3 m tall, 0.46 m thick,
    front face -Y. Rotate 90 degrees about the shared node for corners.
  Moving parts and their placement (same transform as the frame unless stated):
    spike_bed       rest = hidden in the pit; move +0.62 m on Z to arm (tips 0.56 m above the floor)
    pressure_plate  rest = 12 mm proud; move -0.03 m on Z when stepped on
    saw_blade       pivot = hub; tile-local (x 0.6..1.4, y 1.0, z -0.10); spin about local Y, slide on X
    trapdoor_leaf   pivot = hinge axis 11 cm below the leaf top; left leaf at tile-local (0.236, 1.0, -0.11),
                    right leaf at (1.764, 1.0, -0.11) rotated 180 degrees about Z; rotate about local Y
                    0..90 degrees to drop open
    lever_handle    same transform as wall_lever_plate (pivot = axle); throw -40..+40 degrees about local Y;
                    grip centre at (0, -0.12, 0.47) for a hand socket
    pendulum_blade  same transform as pendulum_mount (pivot = axle, 2.75 m above the floor under a 3 m
                    ceiling); swing about local Y, up to +/-60 degrees; lowest edge 0.29 m above the floor
    portcullis      pivot = bottom centre; 1.5 x 2.9 m, covers a 1.2 x 2.3 m doorway; raise +2.4 m on Z
    ceiling_crusher pivot = top centre of the block; rest at the crusher_housing transform + (0, 0, -0.70);
                    lower up to 1.3 m on -Z (spike tips 0.92 m below the block's pivot); the block's corners
                    run in the housing's four guide angles
  LODs: LOD0, LOD1, LOD2 (about 41% and 26% of LOD0 across the kit), shared UVs and textures;
    LODs keep the LOD0 silhouette and were checked for holes.
  Collision: convex hulls (UCX_<piece>_NN inside <piece>.fbx, plus <piece>_collision.glb): one per piece,
    two for the pendulum blade (arm, blade) and the jaw traps (trap, chain and stake), and 9 boxes for the
    trapdoor pit tile (rim, shaft walls and floor) so the opening stays open.
  Textures per piece (PNG, 2048 px for tiles, walls, spike bed, pendulum, portcullis and crusher parts, 1024 px or
    512 px for the rest): basecolor, roughness and metallic (greyscale), normal (OpenGL, +Y; flip green
    for Unreal), unity_metallic_smoothness (grey + alpha).

Pieces

PieceSize (m)Triangles LOD0 / LOD1 / LOD2CollisionTexturesPivot
Stone floor tile, 2 x 2 m2.00 × 2.00 × 0.211,632 / 816 / 61270 tris2048 pxgrid corner; tile spans x 0..2, y 0..2, top at z = 0
Spike trap tile (frame)2.00 × 2.00 × 0.999,454 / 3,544 / 1,914108 tris2048 pxgrid corner; tile spans x 0..2, y 0..2, top at z = 0
Spike bed (moving)1.34 × 1.34 × 0.711,840 / 690 / 49650 tris2048 pxsame as the spike trap tile (grid corner); rest = hidden, raise +0.62 m on Z to arm
Pressure plate tile (frame)2.00 × 2.00 × 0.225,508 / 2,064 / 1,11480 tris2048 pxgrid corner; tile spans x 0..2, y 0..2, top at z = 0
Pressure plate (moving)0.69 × 0.69 × 0.101,448 / 542 / 39048 tris1024 pxsame as the pressure plate tile (grid corner); rest = 12 mm proud, press -0.03 m on Z
Saw slot tile (frame)2.00 × 2.00 × 0.593,248 / 1,218 / 87676 tris2048 pxgrid corner; tile spans x 0..2, y 0..2, top at z = 0
Saw blade (moving)0.79 × 0.10 × 0.799,632 / 3,612 / 1,95082 tris1024 pxhub centre; spins about local Y; place at x 0.6..1.4, y 1.0, z -0.10 in the slot tile (blade in the XZ plane)
Trapdoor pit tile (frame, 2 m shaft)2.00 × 2.00 × 2.1317,182 / 6,442 / 3,478108 (9 boxes) tris2048 pxgrid corner; tile spans x 0..2, y 0..2, top at z = 0
Trapdoor leaf (moving)0.78 × 1.57 × 0.131,172 / 740 / 69256 tris1024 pxhinge axis (local Y at x = 0), 11 cm below the leaf top; rotate about Y to drop open
Dungeon wall, 2 m2.00 × 0.48 × 3.005,412 / 2,012 / 1,09482 tris2048 pxsegment start on the grid line (x = 0), bottom; runs +X to x = 2 m
Dart trap wall, 2 m2.00 × 0.65 × 3.008,492 / 3,184 / 2,29268 tris2048 pxsegment start on the grid line (x = 0), bottom; runs +X to x = 2 m; nozzles face -Y
Dart0.04 × 0.04 × 0.24180 / 90 / 4814 tris512 pxcentre of mass on the shaft axis; flies along +Z (rotate to the nozzle's -Y)
Wall lever mount0.32 × 0.04 × 0.641,052 / 736 / 57862 tris1024 pxlever axle centre (back face at y = 0 sits on the wall); mount on a wall face, plate faces -Y
Lever handle (moving)0.07 × 0.12 × 0.62448 / 224 / 16840 tris1024 pxaxle centre; throw +/-40 deg about local Y. Grip centre at (0, -0.12, 0.47) for a hand socket
Pendulum ceiling mount0.40 × 0.40 × 0.30916 / 342 / 24668 tris1024 pxaxle centre; the ceiling plate top is 0.25 m above it (axle at 2.75 m under a 3 m ceiling)
Pendulum blade (moving)1.23 × 0.20 × 2.523,116 / 1,168 / 630180 (2 hulls) tris2048 pxaxle centre; swings about local Y (+/-60 deg typical); lowest edge 2.46 m below the axle
Portcullis (moving)1.50 × 0.17 × 2.896,380 / 5,180 / 2,41094 tris2048 pxbottom centre (spike tips at z = 0); raise +2.4 m on Z; fits the dungeon kit's 1.2 x 2.3 m doorway
Crusher ceiling housing (frame)2.26 × 2.26 × 1.455,752 / 2,156 / 1,55286 tris2048 pxtop centre (bolts to the ceiling at z = 0); the block hangs 0.70 m below at rest
Ceiling crusher block (moving)1.91 × 1.91 × 1.4611,000 / 4,124 / 2,226104 tris2048 pxtop centre of the block; spike tips 0.92 m below; chain stubs reach 0.52 m up
Jaw trap, set (open)1.07 × 0.30 × 0.273,752 / 2,626 / 1,418136 (2 hulls) tris1024 pxpan centre at ground level (z = 0); the stake goes 0.2 m into the ground
Jaw trap, sprung (closed)1.07 × 0.18 × 0.393,752 / 1,876 / 1,418156 (2 hulls) tris1024 pxpan centre at ground level (z = 0); the stake goes 0.2 m into the ground

Quality: every FBX and GLB file opens with its meshes, LODs decrease on every piece, every hull is convex, the floor tiles and walls chain on the 2 m grid with no gap, and each moving part clears its frame at rest and at full travel.

Works in Studio with the Town Street Starter

21 models to download · 8 ready-made parts in Studio (the above-ground traps, posed armed)

Buy once and you also get eight set pieces for the Town Street Starter in Studio Build, from this kit's above-ground traps, posed armed: a portcullis gate and a pendulum gate between wall sections, the spiked crusher in its iron frame, a dart wall with its pressure plate, a lever wall, the spike bed and both jaw traps, each with its own LODs. They are static dressing; the pit tiles stay in the download files. Place them on a street with the street placer, or save one and dress Studio Scenes with it, then export as GLB or FBX. You need the Town Street Starter to use them in Studio.

Technical details

Formats
FBX, GLB, PNG, BLEND
Software
Blender, Unity, Unreal Engine, Godot
Provenance
Procedural
AI training
prohibited
Engine
unity, unreal-engine, godot
Engine version
Any (FBX/GLB)
Render pipeline
built-in, urp, hdrp, forward, deferred
LODs included
Yes
Collision meshes
Yes
Polygon budget
17182 tris
Target platform
pc, console, mobile, web

Version history

Latest version 1.2.0, released .

  1. 1.2.0

    1.2.0: Works in Studio. Eight set pieces for the Town Street Starter (portcullis gate, pendulum gate, crusher, dart wall, lever wall, spike bed, two jaw traps) with LODs. The download files are unchanged. Documentation tidy-up: README with the product name, version, licence and support details, and current product names. No changes to the models or files.

  2. 1.1.0

    Documentation tidy-up: README with the product name, version, licence and support details, and current product names. No changes to the models or files.

  3. 1.0.1

    File tidy-up: cleaner file metadata and notes; no changes to the models.

  4. 1.0.0

  • Pack (adds parts to a Starter)Studio-readyFiles validated
    • Interactive 3D preview

    Modular Street Kit: Roads, Pavements, Crossings and Street Furniture

    Pack for Town Street Starter: Pack for Town Street Starter: Roads, Pavements and Street Furniture for Studio

    • 1
    300 creditsNo reviews yet
  • Pack (adds parts to a Starter)Studio-readyFiles validated
    • Interactive 3D preview

    Car Park & EV Charging Kit: Solar Canopy, Chargers, Barriers, Pay Station and Car Park Props

    Pack for Town Street Starter: Pack for Town Street Starter: Roads, Pavements and Street Furniture for Studio

    • 1
    250 creditsNo reviews yet
  • Pack (adds parts to a Starter)Studio-readyFiles validated
    • Interactive 3D preview

    Petrol Station Forecourt Kit: Canopy, Fuel Pumps, Price Sign, Car Wash and Forecourt Props

    Pack for Town Street Starter: Pack for Town Street Starter: Roads, Pavements and Street Furniture for Studio

    • 1
    250 creditsNo reviews yet

Reviews

Own this asset? Sign in to review it.

No reviews yet. Owners can share how the asset worked for them.

    Questions & comments

    Sign in to ask the creator a question.

    No questions yet. Ask about formats, compatibility or licensing.