Skip to content
AssetLoom
Interactive 3D preview (reduced-detail model, 35,728 triangles · 87 × 274 × 12 m). The downloadable files are the full-resolution originals.

Description

Roads & Highways Pack

A pack for the Town Street Starter in AssetLoom Studio. Lay highways, interchanges, one-way streets and bridges piece by piece with Road pieces in Build: each piece snaps onto the open end of the last one, and Scenes traffic drives the lanes, changes lane where the line is dashed, takes the ramps and gives way at merges.

What's included (71 pieces)

  • Highways, 2 + 2 and 3 + 3 lanes: straights (20 m and 40 m) and curves (60 m and 120 m radius; 15, 30 and 45 degrees; left and right) with a concrete step barrier on the median, hard shoulders, grass verges and W-beam guardrails.
  • Off and on ramps: for traffic on the right and on the left, with a slip road leaving at 15 degrees over a 40 m taper, hatched gores and a crash cushion on each gore nose. Ramps, curves and town streets all turn in 15 degree steps, so the town streets fed by an off ramp and an on ramp line up on one grid.
  • Slip roads: a straight, curves of 15 and 30 degrees, an end that joins a town road, and a start that leads from a town road onto an on ramp.
  • Older ramps: the 12 degree off and on ramps of version 1.0 are still included (labelled "12°, older") so roads already built with them keep working. Use the 15 degree ramps for new roads.
  • Lane merge: 3 + 3 to 2 + 2 lanes, and a one-way 3 to 2 lane merge.
  • Highway end: a 2 + 2 highway closing into a two-lane town road with kerbs and pavements, so it joins a Town Street.
  • One-way streets: 2 and 3 lanes with direction arrows, and an end into a two-way town road with no-entry signs (traffic on the right or left).
  • Bridges: decks for a highway and for a town road with walkways (20 m and 40 m, at 6 m with 5 m clear over a road below), each with its own pier, and approach ramps up and down with rounded crests, retaining walls and parapets or railings.
  • Set pieces: bridge piers (highway and town), a concrete step barrier, a steel guardrail, a sign gantry over a carriageway and 12 m highway lamps (single and twin arm).

In Studio

In Build, choose the Town Street Starter and the Road pieces shape, then add pieces to the open ends. Loops close by themselves; adapters join highways and one-way streets to town roads, and those ends join a Town Street in Scenes. Every drivable piece carries its lanes and speed (highway 100 km/h, slip roads 60, town and one-way 50). At night the highway lamps glow. Every piece has LOD1 and LOD2 and colliders on its barriers, parapets, piers and posts. Needs the Town Street Starter (2.0.0 or newer).

Download

Every piece comes as GLB and plain FBX with LOD1, LOD2 and colliders (UCX_/UBX_), the shared textures, and a README. The pieces are unbranded: the only words are generic sign words (NORTH, CENTRE) and a junction number.

Standard licence: use in personal and commercial projects; don't resell or share the files. See https://assetloom.io/licenses

Technical details

Formats
GLB, FBX, JPG, JSON, WEBP, TXT
Software
Blender
Provenance
Procedural
AI training
prohibited
Engine
unity, unreal-engine, godot
Engine version
Unity 2022.3 LTS+, Unreal Engine 5.3+, Godot 4.2+ (GLB and FBX re-imported in Blender to check; not tested inside the engines)
LODs included
Yes
Collision meshes
Yes
Polygon budget
8972 tris
Target platform
pc

Version history

Latest version 1.2.0, released .

  1. 1.2.0

    The grass verges now stop at the road edge instead of running under the road surface, so no green slivers show through the lanes on curves when you look from high up and far away. Sockets, lanes, collision and levels of detail are unchanged, so saved builds open as before. The README now has the product name, version, licence and support details.

  2. 1.1.0

    Off and on ramps at 15 degrees (2 + 2 and 3 + 3 lanes, traffic on the right or left), 15 degree slip road curves, and a slip road start from a town road onto an on ramp, so one town street grid can take both an off ramp and an on ramp. The 12 degree ramps stay for roads already built with them, labelled as older.

  3. 1.0.1

    File tidy-up: cleaner file metadata and notes; no changes to the models.

  4. 1.0.0

  • Pack (adds parts to a Starter)Studio-readyFiles validated
    • Interactive 3D preview

    Car Park & EV Charging Kit: Solar Canopy, Chargers, Barriers, Pay Station and Car Park Props

    Pack for Town Street Starter: Pack for Town Street Starter: Roads, Pavements and Street Furniture for Studio

    • 1
    250 creditsNo reviews yet
  • Pack (adds parts to a Starter)Studio-readyFiles validated
    • Interactive 3D preview

    Park Pack for Town Street Starter: Trees, Lawns, Fountain, Railings

    Pack for Town Street Starter: Pack for Town Street Starter: Roads, Pavements and Street Furniture for Studio

    • 2
    100 creditsNo reviews yet
  • Pack (adds parts to a Starter)Studio-readyFiles validated
    • Interactive 3D preview

    Modular Street Kit: Roads, Pavements, Crossings and Street Furniture

    Pack for Town Street Starter: Pack for Town Street Starter: Roads, Pavements and Street Furniture for Studio

    • 1
    300 creditsNo reviews yet

Reviews

Own this asset? Sign in to review it.

No reviews yet. Owners can share how the asset worked for them.

    Questions & comments

    Sign in to ask the creator a question.

    No questions yet. Ask about formats, compatibility or licensing.