Skip to content
AssetLoom
Interactive 3D preview (reduced-detail model, 35,852 triangles · 21 × 12 × 34 cm). The downloadable files are the full-resolution originals.

Description

Count down to Christmas with a tree you printed yourself. Seven rows of little drawers stack on a stand like bricks, each row one drawer narrower than the one below and set in by half a drawer on each side, with three trunk drawers at the bottom and a faceted star on top. Day 1 is in the trunk and day 24 sits right under the star.

Every drawer is the same size, so any drawer fits any bay, and the whole calendar lifts apart for storage and comes back out next December.

What's included (STL + 3MF, in print orientation)

  • Stand with four recesses underneath for 10 mm rubber bumpers
  • Trunk and rows of 6, 5, 4, 3, 2 and 1 bays, each locked to the one below by small 45 degree ridges in closed grooves, so rows can't slide in any direction. No glue, screws or hardware
  • Faceted star that keys into the top row
  • 24 numbered drawers plus a blank one, in a standard (0.30 mm) and a loose (0.45 mm) fit. Each has a finger notch and numbers engraved 0.8 mm deep
  • Two-colour numbers: each drawer's 3MF holds the drawer and its numbers as two parts of one object, ready for a second filament. Single-colour prints still read clearly
  • A quick fit test: a one-bay row slice (print two to test the ridge) and standard and loose drawer slices
  • The assembled .blend file

Sizes

  • Assembled: 212 mm wide, 342 mm tall, 48 mm deep, on a 190 x 120 mm stand
  • Bays 33 x 33 mm. Inside each drawer: about 30 x 42 mm and 31 mm tall, for a wrapped chocolate or two, sweets, a folded note or a tiny gift

Print settings

  • 0.4 mm nozzle, 0.2 mm layers, no supports, print as supplied
  • PLA or PETG, 3 walls, 15 to 20 % infill
  • Every part fits a 220 x 220 mm bed (four plates shown in the previews)
  • About 0.8 kg of filament in total

Please note

Sweets and the colours in the previews are just examples. Every fit was checked in software on the exported files: each row on the one below, the star socket, and all 24 drawers in both fits in their bays. It has not yet been test-printed by us, which is why there are two drawer fits and a fit test. Drawers hold small treats only: keep it away from small children if the contents or parts are small enough to swallow.

Technical details

Formats
STL, 3MF, BLEND
Software
Bambu Studio, PrusaSlicer, OrcaSlicer, Cura, Blender
Provenance
Procedural
AI training
prohibited
Watertight
Yes
Manifold
Yes
Print tested by creator
No
Printer type
fdm
Supports required
none
Dimensions (W×D×H mm)
assembled 212 x 48 x 342 (W x D x H); stand 190 x 120 x 10; rows 37 to 212 wide x 38.4 tall x 48 deep; drawers 32.4 x 45.7 x 32.4; star 64.7 x 64.7 x 16
Recommended print settings
0.4 mm nozzle, 0.2 mm layers, no supports, no scaling, XY compensation 0. PLA or PETG, 3 walls, 15-20 % infill. Rows and star on their backs, drawers and stand upright. Print the fit test first.

Version history

Latest version 1.1.0, released .

  1. 1.1.0

    Documentation tidy-up: README with the product name, version, licence and support details, and current product names. No changes to the models or files.

  2. 1.0.0

Reviews

Own this asset? Sign in to review it.

No reviews yet. Owners can share how the asset worked for them.

    Questions & comments

    Sign in to ask the creator a question.

    No questions yet. Ask about formats, compatibility or licensing.