Skip to content
AssetLoom
Interactive 3D preview (reduced-detail model, 38,526 triangles · 13 × 3.6 × 14 cm). The downloadable files are the full-resolution originals.

Description

A Christmas reindeer that comes off the printer already assembled and ready to play with. Nine pieces are linked by eight captured joints, so the head looks up, the neck nods, the body bends, the tail wags and all four legs walk. Press the hooves into the snow base and it stands on a shelf or mantelpiece; take it out and it is a desk fidget or a stocking filler.

What's included (STL + 3MF, in print orientation)

  • Size M (134 x 133 mm flat, 14 mm thick, fits a 180 mm bed) and size L (180 x 179 mm flat, 17.5 mm thick, fits a 220 mm bed)
  • Each size in a standard (0.40 mm) and a loose (0.50 mm) joint fit
  • Two-colour 3MF for every version: body plus a red nose and scarf as separate parts of one object, ready for a second filament
  • A snow base for each size with four hoof pockets that hold it upright
  • A joint fit test with three small joints at 0.30, 0.40 and 0.50 mm, marked with 1, 2 and 3 dots
  • The .blend source file and a README with print and setup steps

How the joints work

Each joint is a pin that is wider in the middle than the top and bottom of its socket, so it turns smoothly but can't lift out or pull apart. Every joint has stops, and the head and neck are limited downwards so it holds its head up when it stands.

Print settings

  • 0.4 mm nozzle, 0.2 mm layers, no supports, print flat as supplied
  • PLA or PETG, 3 walls, 15 % infill
  • About 36 g for size M plus 16 g for its base; about 75 g plus 22 g for size L
  • Print the fit test first (about 8 g) to choose standard or loose

Please note

Colours in the previews are examples. Every piece and joint was checked in software on the exported files: closed and watertight, flat first layer, no overhangs over 45 degrees, every joint captured with no overlaps, and the base holds the hooves. It has not yet been test-printed by us, which is why there are two fits and a fit test. Small parts: not suitable for children under 3.

Technical details

Formats
STL, 3MF, BLEND
Software
Bambu Studio, PrusaSlicer, OrcaSlicer, Cura, Blender
Provenance
Procedural
AI training
prohibited
Watertight
Yes
Manifold
Yes
Print tested by creator
No
Printer type
fdm
Supports required
none
Dimensions (W×D×H mm)
size M 133.6 x 132.9 x 14 flat (137 tall standing on its base); size L 180.4 x 179.4 x 17.5 flat; bases 100.5 x 36 x 8 and 124.5 x 39.5 x 8; fit test 40 x 50 x 8
Recommended print settings
0.4 mm nozzle, 0.2 mm layers, no supports, no brim, no scaling, XY compensation 0. PLA or PETG, 3 walls, 15 % infill. Print flat as supplied. Print the joint fit test first.

Reviews

Own this asset? Sign in to review it.

No reviews yet. Owners can share how the asset worked for them.

    Questions & comments

    Sign in to ask the creator a question.

    No questions yet. Ask about formats, compatibility or licensing.