Skip to content
AssetLoom
Interactive 3D preview (reduced-detail model, 55,751 triangles · 24 × 13 × 2.8 m). The downloadable files are the full-resolution originals.

Description

A 12-piece skips and waste yard kit for recycling yards, building sites, industrial estates, scrapyards and back lots: two builder's skips (empty and loaded), a hook-lift roll-on roll-off container, a 1100 litre commercial bin, an IBC tote, oil drums, tyres and pallets, a vertical baler with a finished bale, a portable site cabin, and a 2.4 m palisade fence with a 4 m double gate. Baked PBR textures, three LODs and collision on every piece, and a demo yard.

What's included

  • Skips and containers (4): an 8-yard open steel skip, empty and heaped with broken concrete, brick, timber offcuts and a rusty pipe (ribs, four lifting trunnions, tipping lugs, floor runners); an open-top roll-on roll-off container (6.1 m body, 6.75 m overall with its hook frame) with ribbed sides, an A-frame hook bar, barn doors with locking bars and rear rollers; a galvanised 1100 litre wheelie bin with a split lid, castors and lifting trunnions.
  • Yard clutter (4): a 1000 litre IBC tote in its tube cage on a steel pallet; four dented 205 litre drums (three standing, one lying); a tyre stack with one tyre leaning on it; a stack of 1200 x 800 mm wooden pallets.
  • Machines and buildings (2): a 2.8 m vertical baler with an open crosshead showing its hydraulic cylinder, a bale door with two clamp latches, a mesh loading guard, a side power pack (motor, tank and hoses), a control box and mains isolator, plus a strapped cardboard bale; a 3.7 m portable site cabin with corrugated walls, barred windows, a steel door and handrailed steps.
  • Fencing (2): a 2.4 m green palisade fence with triple-pointed pales that rows end to end on a 2 m step; a matching 4 m double gate with hinges, a drop bolt and a padlocked hasp.
  • Formats: FBX and GLB per piece (LOD0, LOD1, LOD2 and collision), PNG texture sets, the Blender source and a demo yard (.blend and .glb) laid out as in the previews.

Specs

  • Real-world scale in metres; fence and gate snap into lines on a 2 m step (see Conventions)
  • 1,580 to 10,944 triangles per piece at LOD0 (60,404 for all 12)
  • One baked PBR material per piece at 1K to 2K: chipped and rusted paint, galvanised and bare steel, rust, scuffed plastic, rubber, weathered timber, cardboard, concrete and brick rubble
  • Convex collision (UCX_ naming for Unreal), hulls fitted per part

Engines

Works in Unity, Unreal Engine and Godot (and anything that reads FBX or GLB). The README has import notes for each engine.

Good to know

  • Static meshes: no animations or scripts. Doors, lids and gates are modelled closed as part of each mesh.
  • Generic designs with no text, logos or brands.
  • The concrete yard, field and shed wall in the previews are scene only.
  • The .blend source and demo need Blender 5.2 or later; FBX and GLB work in any engine.
CONVENTIONS
  Units: metres, real-world scale. Z-up in .blend; FBX/GLB exported Y-up (engine default).
  Fronts face -Y in the .blend (forward in most engines after export).
  Pivots: the bottom centre of each piece's footprint, on the ground.
  Fence: the 2 m palisade fence is exactly 2.0 m long with its post at the -X end, so rows placed on
    a 2 m step close up post to panel (0 overlapping triangles between two panels at 2 m spacing).
    The double gate is 4.56 m wide overall with 3.99 m clear between its posts,
    so a fence panel centre sits 3.3 m either side of the gate centre.
  LODs: LOD0, LOD1, LOD2 share UVs and textures. LOD1 drops small details (bolts, rings, eyes);
    LOD2 also drops caps and trims and is edge-collapsed where needed.
  Collision: convex hulls (UCX_<piece>_NN inside <piece>.fbx, plus <piece>_collision.glb).
  Materials: one baked PBR material per piece (2048 px for the skips, container,
    baler and cabin; 1024 px for the rest).
    Maps: basecolor, roughness, metallic, normal (OpenGL, +Y), normal_directx, unity_metallic_smoothness.

Pieces

PieceSize (m)Triangles LOD0 / LOD1 / LOD2CollisionTexturesPivot
Builder's skip (empty)3.77 × 2.06 × 1.262,010 / 1,104 / 55072 (6 hulls) tris2048 pxbottom centre on the ground; long axis along X
Builder's skip (loaded)3.77 × 2.06 × 1.748,124 / 4,468 / 2,23232 (2 hulls) tris2048 pxbottom centre on the ground; long axis along X
Roll-on roll-off container6.75 × 2.64 × 2.133,784 / 2,080 / 1,04068 (6 hulls) tris2048 pxbottom centre on the ground; long axis along X, doors at +X
1100 litre commercial bin1.52 × 1.23 × 1.425,140 / 2,826 / 1,41212 tris1024 pxbottom centre on the ground; lid hinges at +Y, front toward -Y
IBC tote1.20 × 1.15 × 1.182,836 / 1,558 / 77812 tris1024 pxbottom centre on the ground; valve toward -Y
Oil drums (group of four)2.27 × 1.42 × 0.894,064 / 2,234 / 1,11636 (3 hulls) tris1024 pxbottom centre of the footprint on the ground
Tyre stack1.30 × 1.09 × 0.9810,944 / 6,018 / 3,00856 (2 hulls) tris1024 pxbottom centre of the footprint on the ground
Pallet stack2.41 × 1.23 × 0.867,040 / 3,872 / 1,93624 (2 hulls) tris1024 pxbottom centre of the footprint on the ground
Vertical baler with bale3.44 × 1.32 × 2.815,132 / 2,821 / 1,39448 (4 hulls) tris2048 pxbottom centre of the footprint on the ground; baler front toward -Y
Portable site cabin3.78 × 3.23 × 2.756,978 / 3,836 / 1,91024 (2 hulls) tris2048 pxbottom centre on the ground; door on the -Y side
Palisade fence, 2 m2.00 × 0.20 × 2.461,580 / 1,004 / 50212 tris1024 pxbottom centre on the ground; runs along X from -1.0 to +1.0 m, pales face -Y
Palisade double gate4.56 × 0.40 × 2.572,772 / 1,524 / 71436 (3 hulls) tris1024 pxbottom centre on the ground; gate in the XZ plane, pales face -Y

Every FBX and GLB file opens in Blender 5.2 and imports with its meshes.

Engine import

  • Unity: URP/HDRP Lit. Base Map = basecolor, Metallic Map = unity_metallic_smoothness (smoothness from alpha), Normal Map = normal. LOD Group with the three meshes; convex MeshColliders from the collision mesh.
  • Unreal: import .fbx (UCX meshes become simple collision), then the LOD1 and LOD2 FBX files as LOD levels. Use the DirectX normal map.
  • Godot 4: import the GLB files; use the collision GLB for ConvexPolygonShape3D shapes and visibility ranges for LODs.

Works in Studio with the Town Street Starter

The download has 12 models; Studio adds 12 street pieces built from them.

Buy once and you also get twelve street pieces for the Town Street Starter in Studio Build: both skips, the roll-on container, the 1100 litre bin, the IBC tote, oil drums, tyre and pallet stacks, the baler, the site cabin, and the palisade fence and double gate, all from these models with their own LODs. Place them beside a street to make a recycling yard, a scrapyard back lot or a building site, or save one and reuse it, then export as GLB or FBX. You need the Town Street Starter to use them in Studio. They are static set dressing. Pairs with the Petrol Station Forecourt Kit and the Car Park & EV Charging Kit.

Technical details

Formats
BLEND, FBX, GLB, JSON, PNG, TXT, WEBP
Software
Blender, Unity, Unreal Engine, Godot
Provenance
Procedural
AI training
prohibited
Engine
unity, unreal-engine, godot
Engine version
Any (FBX/GLB)
Render pipeline
built-in, urp, hdrp, forward, deferred
LODs included
Yes
Collision meshes
Yes
Polygon budget
10944 tris
Target platform
pc, console, mobile, web
  • Pack (adds parts to a Starter)Studio-readyFiles validated
    • Interactive 3D preview

    Winter Street Snow Kit: Snowmen, Snow Banks, Grit Bin, Sledges and Festive Lights

    Pack for Town Street Starter: Pack for Town Street Starter: Roads, Pavements and Street Furniture for Studio

    • 1
    250 creditsNo reviews yet
  • Pack (adds parts to a Starter)Studio-readyFiles validated
    • Interactive 3D preview

    Car Park & EV Charging Kit: Solar Canopy, Chargers, Barriers, Pay Station and Car Park Props

    Pack for Town Street Starter: Pack for Town Street Starter: Roads, Pavements and Street Furniture for Studio

    • 1
    250 creditsNo reviews yet
  • Pack (adds parts to a Starter)Studio-readyFiles validated
    • Interactive 3D preview

    Petrol Station Forecourt Kit: Canopy, Fuel Pumps, Price Sign, Car Wash and Forecourt Props

    Pack for Town Street Starter: Pack for Town Street Starter: Roads, Pavements and Street Furniture for Studio

    • 1
    250 creditsNo reviews yet

Reviews

Own this asset? Sign in to review it.

No reviews yet. Owners can share how the asset worked for them.

    Questions & comments

    Sign in to ask the creator a question.

    No questions yet. Ask about formats, compatibility or licensing.