Skip to content
AssetLoom
Interactive 3D preview (reduced-detail model, 36,550 triangles · 15 × 8.3 × 2.2 cm). The downloadable files are the full-resolution originals.

Description

Printable hand knobs that turn a standard hex nut or hex-head bolt into a tool-free clamp: jigs, fences, camera and light mounts, enclosures and printer upgrades. Three styles, five thread sizes, two pocket fits each, and a nut fit test plate so the nuts fit your printer. Everything prints with no supports.

What's included (31 models, STL + 3MF, in print orientation)

  • Star knobs (5 or 6 lobes, bearing collar): M3 Ø22, M4 Ø27, M5 Ø32, M6 Ø38, M8 Ø48 mm
  • Knurled thumb nuts (1.6 mm knurl): M3 Ø12, M4 Ø15, M5 Ø17, M6 Ø21, M8 Ø27 mm
  • Wing knobs with rounded ears: M3 28 mm to M8 60 mm span
  • Two pocket fits for every knob: press (nut + 0.20 mm across flats) and slip (+ 0.40 mm)
  • Nut fit test plate (119 × 84 × 4 mm): 25 labelled pockets, M3 to M8 at +0.10 to +0.50 mm
  • The .blend file and the parametric Python generator (change any size or clearance and rebuild)

How it works

  • Drop an ISO 4032 hex nut into the pocket and the knob screws onto any bolt or threaded rod, or seat an ISO 4017 hex-head bolt to make a thumb screw.
  • The pocket opens on the top, so tightening pulls the nut down onto solid plastic (3.3 to 14.9 mm thick under the nut), not against the press fit.
  • A seated nut cannot spin: the hex locks it in.
  • Every downward-facing surface is a chamfer or cone at 41° from vertical or less, with 0.4 mm chamfered bottom edges. Bearing face down, no supports, no brim.

Print settings

  • PLA for light duty, PETG or ASA for workshop clamps
  • 0.4 mm nozzle, 0.2 mm layers, 4 perimeters, 30 to 40 % infill
  • Print the test plate first, then pick press or slip (or regenerate at the clearance your printer needs)

Please note

Plastic knobs are for hand tightening. Use PETG or ASA for parts under constant load. Not for safety-critical fixings. The fits are checked in software and have not yet been test-printed by us. Nyloc nuts and socket-head screws need a regenerated pocket (the generator is included).

Technical details

Formats
STL, 3MF, BLEND
Software
Bambu Studio, PrusaSlicer, OrcaSlicer, Cura, Blender
Provenance
Procedural
AI training
prohibited
Watertight
Yes
Manifold
Yes
Print tested by creator
No
Printer type
fdm
Supports required
none
Dimensions (W×D×H mm)
Star knobs 22 x 11 to 48 x 22; knurled nuts 12 x 6 to 27 x 11; wing knobs 28 x 10 x 13 to 60 x 22 x 28; test plate 119 x 84 x 4
Recommended print settings
PLA, PETG or ASA, 0.4 mm nozzle, 0.2 mm layers, 4 perimeters, 30-40% infill, bearing face down as supplied, no supports; print the nut fit test plate first

Version history

Latest version 1.0.2, released .

  1. 1.0.2

    Download tidy-up: removed internal build files

  2. 1.0.1

    File tidy-up: cleaner file metadata and notes; no changes to the models.

  3. 1.0.0

Reviews

Own this asset? Sign in to review it.

No reviews yet. Owners can share how the asset worked for them.

    Questions & comments

    Sign in to ask the creator a question.

    No questions yet. Ask about formats, compatibility or licensing.