Skip to content
AssetLoom
Interactive 3D preview (reduced-detail model, 3,646 triangles · 41 × 13 × 7.6 cm). The downloadable files are the full-resolution originals.

Description

A matched set of wall holders for a French cleat wall, the 45 degree bevel system that lets you hook tools on and slide them anywhere. Every holder comes in two versions: one for the printed rail included in the set and one for 18 to 19 mm (3/4 in) plywood cleats. All of it prints with no supports.

What's included (20 models, STL + 3MF, in print orientation)

  • Screwdriver rack: 9 screwdrivers in two staggered rows (5 x 11 mm and 4 x 8 mm holes)
  • Pliers rack: 6 pliers or cutters, handles through 14 x 36 mm slots
  • Bit rack: 20 x 1/4 in hex bits, in snug (+0.20 mm) and loose (+0.40 mm) fits
  • Cup ring for 2 cups, ledge shelf with a front lip, small hook (50 mm reach) and large hook (110 mm reach)
  • Each of these 8 files (7 designs, bit rack in 2 fits) for the printed rail and for plywood cleats (16 files)
  • Printed rail in 200 and 100 mm lengths with countersunk screw holes
  • Drop-in cup for the cup ring, and a bit fit gauge (+0.10 to +0.50 mm) to choose your bit rack fit
  • The .blend file and the parametric Python generator (change the cleat thickness, clearances or hole sizes and rebuild)

How it works

  • The hook's underside matches the 45 degree bevel, so the load pulls the holder down and into the wall. Gaps are 0.6 mm to the wall and the cleat face.
  • An anti-tilt foot reaches back to the wall below the cleat, so loaded shelves stay level.
  • Hang it by tilting the bottom out, dropping the hook over the bevel and swinging it in; lift slightly to slide it along.
  • Holders print lying on their side, so the hook, plate and shelf lie in the layer plane and the load runs along the layers. Holes are designed bridges with 45 degree sides (longest 32 mm, pliers slots).

Print settings

  • PETG or ASA for workshop loads, PLA for light items
  • 0.4 mm nozzle, 0.2 mm layers, 4 perimeters, 25 to 40 % infill
  • As supplied, no supports; largest part 76 x 79 x 170 mm (printed-rail screwdriver rack, standing on its side)

Please note

Plastic holders are for hand tools and light storage, not for lifting or safety-critical use; the wall fixing matters as much as the print. The fits are checked in software and have not yet been test-printed by us. Plywood holders suit cleats with a front face up to 72 mm tall; for taller cleats, regenerate with the included generator.

Technical details

Formats
STL, 3MF, BLEND
Software
Bambu Studio, PrusaSlicer, OrcaSlicer, Cura, Blender
Provenance
Procedural
AI training
prohibited
Watertight
Yes
Manifold
Yes
Print tested by creator
No
Printer type
fdm
Supports required
none
Dimensions (W×D×H mm)
Holders 24 x 67 x 76 to 170 x 107 x 76 (printed rail), plywood versions 38 mm taller; rails 200 and 100 x 12 x 40; cup 77 x 77 x 95; gauge 78 x 17 x 14
Recommended print settings
PETG or ASA (PLA for light loads), 0.4 mm nozzle, 0.2 mm layers, 4 perimeters, 25-40% infill, print as supplied (holders on their side, rail on its back), no supports

Version history

Latest version 1.0.2, released .

  1. 1.0.2

    Download tidy-up: removed internal build files

  2. 1.0.1

    File tidy-up: cleaner file metadata and notes; no changes to the models.

  3. 1.0.0

Reviews

Own this asset? Sign in to review it.

No reviews yet. Owners can share how the asset worked for them.

    Questions & comments

    Sign in to ask the creator a question.

    No questions yet. Ask about formats, compatibility or licensing.