Skip to content
AssetLoom
Interactive 3D preview (reduced-detail model, 9,564 triangles · 20 × 3 × 2.1 cm). The downloadable files are the full-resolution originals.

Description

Keep sockets in order on printed rails. Each clip has a split drive post with two small ridges: the two halves flex inwards as the socket goes on, then grip its square, so sockets are designed to push on and stay on (sockets with a detent recess should click into place). The clips are rigid PLA or PETG; unlike most printable socket rails, no TPU is needed. Clips slide along a dovetail rail, so you can space them to suit any socket size.

What's included (23 print files, STL + 3MF, in print orientation)

  • Rails: 200 mm in 3 fits (snug, standard, loose) and a 120 mm rail, each with countersunk holes for 4 mm screws, pockets for 10 x 3 mm magnets underneath and a cross hole near each end for a filament-pin end stop
  • Plain clips for 1/4, 3/8 and 1/2 in drives in 3 grips (light, standard, firm), marked with 1, 2 or 3 dimples
  • 77 labelled clips on 6 print plates with the size engraved on the front. Metric 1/4 in: 4, 4.5, 5, 5.5, 6 to 14. Metric 3/8 in: 8 to 19, 21, 22. Metric 1/2 in: 10 to 19, 21, 22, 24, 27, 30, 32. SAE 1/4 in: 5/32 to 9/16. SAE 3/8 in: 5/16 to 7/8. SAE 1/2 in: 7/16 to 1-1/8 and 1-1/4. Plain clips cover any other size
  • Fit test kit: three 40 mm test rails and a slider, so you can pick your rail fit in about 10 minutes
  • The .blend file and the Python generator: change lengths, hole spacing, grips or label sizes and rebuild

How it goes together

Print the fit test, then rails in the fit that slides best. Screw the rail down, drop it in a drawer, or glue magnets underneath for a steel toolbox. Slide on the clips, then push a 22 mm piece of 1.75 mm filament through the cross hole at each end so the clips can't slide off (kink or melt the pin ends slightly if it feels loose).

Print settings

  • 0.4 mm nozzle, 0.2 mm layers, no supports, no scaling, slicer XY compensation 0
  • Rails: PLA or PETG, 3 walls, 15-20 % infill, flat as supplied. Clips: PETG recommended (PLA is fine for light and standard grips), 3 walls, 40 % infill or more, jaws down as supplied
  • Every file fits a 220 x 220 mm bed; everything except the 200 mm rails fits 180 x 180 mm

Please note

Fits were checked in software (clip to rail clearance 0.1, 0.2 or 0.3 mm per side; post grip worked out against the standard socket drive range), but the set has not yet been test-printed by us, which is why the fit test kit and three grips are included. Sockets differ slightly inside, so try one clip of each grip first. Sockets, magnets, screws and filament pins are not included; the sockets in the previews are props.

Technical details

Formats
STL, 3MF, BLEND
Software
Bambu Studio, PrusaSlicer, OrcaSlicer, Cura, Blender
Provenance
Procedural
AI training
prohibited
Watertight
Yes
Manifold
Yes
Print tested by creator
No
Printer type
fdm
Supports required
none
Dimensions (W×D×H mm)
Rails 200 or 120 x 30 x 12; clips 14 / 18 / 22 x 26.6 x 17.6 / 19.6 / 22.1; label plates up to 166 x 90
Recommended print settings
0.4 mm nozzle, 0.2 mm layers, no supports, no scaling, XY compensation 0. Rails PLA or PETG, 3 walls, 15-20% infill. Clips PETG (PLA fine for light and standard grips), 3 walls, 40%+ infill. Print the fit test kit first.

Version history

Latest version 1.0.1, released .

  1. 1.0.1

    File tidy-up: cleaner file metadata and notes; no changes to the models.

  2. 1.0.0

Reviews

Own this asset? Sign in to review it.

No reviews yet. Owners can share how the asset worked for them.

    Questions & comments

    Sign in to ask the creator a question.

    No questions yet. Ask about formats, compatibility or licensing.