Skip to content
AssetLoom
Interactive 3D preview (reduced-detail model, 27,694 triangles · 20 × 16 × 1.4 cm). The downloadable files are the full-resolution originals.

Description

Print-in-place drill bit cases: each one prints flat as a single piece, base and lid joined by a cone-pin hinge, with a snap latch. Every bit gets its own cradle with its size debossed past the tip and a finger scoop at the shank end.

What's included (11 print files, STL + 3MF, in print orientation)

  • 5 cases covering 1 to 13 mm in 0.5 mm steps and 1/16 to 1/2 in by 32nds: metric 1-6 mm (11 bits), 6.5-10 mm (8), 10.5-13 mm (6), imperial 1/16-9/32 in (8) and 5/16-1/2 in (7)
  • Every case in a standard (hinge 0.4 mm, cradle 0.15 mm) and a loose (hinge 0.5 mm, cradle 0.20 mm) fit
  • A fit test: three mini hinge boxes (0.3 / 0.4 / 0.5 mm) and a cradle strip with 3, 6 and 10 mm cradles in both fits, so you can check your printer before a long print
  • The .blend file and the Python generator that builds and checks every part

How it works

  • Snap cradles for bits of 3 mm (1/8 in) and up: two clips per bit, each a pair of thin flexing tongues with 45 degree lips, so a bit clicks in and stays in when the open case is turned over
  • Bits under 3 mm lie in plain cradles and a rib under the lid holds each one when the case is shut
  • Channels are bit length + 4 mm for DIN 338 / jobber length bits, labels debossed 0.4 mm, range label on the lid
  • No supports: every face is 45 degrees or steeper, apart from short bridges under 1.1 mm at the debossed lid label

Print settings

  • 0.4 mm nozzle, 0.2 mm layers, no supports, print as supplied, XY compensation 0
  • PETG recommended, PLA works. 3 walls, 15 to 20% infill
  • Every case fits a 220 x 220 mm bed (largest 211 x 193 mm open)

Please note

Every fit was checked in software on the exported meshes: hinge clearances over the full 180 degree swing, cradle radius, lip opening and snap measured from sections of the print files, lid ribs, and every bit (true length, full diameter) inside the closed case. The cases have not yet been test-printed by us, which is why there are two fits and a fit test. The drill bits in the previews are render props and are not included.

Technical details

Formats
STL, 3MF, BLEND
Software
Bambu Studio, PrusaSlicer, OrcaSlicer, Cura, Blender
Provenance
Procedural
AI training
prohibited
Watertight
Yes
Manifold
Yes
Print tested by creator
No
Printer type
fdm
Supports required
none
Dimensions (W×D×H mm)
open as printed: 182.2 x 122.8, 202.6 x 162.8, 200.8 x 183.8, 161.0 x 144.8, 209.6 x 192.8 (14-15.3 high); fit test 148.3 x 154 x 18
Recommended print settings
0.4 mm nozzle, 0.2 mm layers, no supports, no scaling, XY compensation 0. PETG (recommended) or PLA, 3 walls, 15-20% infill. Print the fit test first, then the standard or loose cases.

Version history

Latest version 1.0.2, released .

  1. 1.0.2

    Download tidy-up: removed internal build files

  2. 1.0.1

    File tidy-up: cleaner file metadata and notes; no changes to the models.

  3. 1.0.0

Reviews

Own this asset? Sign in to review it.

No reviews yet. Owners can share how the asset worked for them.

    Questions & comments

    Sign in to ask the creator a question.

    No questions yet. Ask about formats, compatibility or licensing.