Skip to content
AssetLoom
Interactive 3D preview (reduced-detail model, 12,512 triangles · 17 × 14 × 1.2 cm). The downloadable files are the full-resolution originals.

Description

Bag clips that come off the printer already assembled. The hinge and the snap latch print in one go, flat on the bed, with no supports and nothing to put together. Turn the arm once to free the hinge, close it on a crisp packet, coffee bag, frozen veg or flour bag, and the latch clicks shut.

What's included (8 print files, STL + 3MF, in print orientation)

  • 4 lengths: 60, 90, 120 and 160 mm arms (52, 82, 111 and 151 mm clamping faces), 10 mm tall (60, 90) or 12 mm tall (120, 160)
  • 2 hinge fits for every length: standard (0.35 mm clearance) and loose (0.45 mm) for printers that over-extrude
  • The .blend file (print orientation and closed pose) and the Python generator: change lengths, heights or clearances and rebuild every clip with its checks

How it works

  • Captive print-in-place hinge: a 45 degree bi-cone pin inside a C-shaped ring. It can't lift off, and the ring's opening is narrower than the pin, so it can't slide off sideways either. Built-in opening stop at about 65 degrees (74 on the long clips)
  • Sealing ridge in a V-groove along the whole clamping face, so the bag film is pinched along a line, not just at the tip
  • Snap latch: a flexing leg with a ramped lip clicks over the tip of the other arm; a thumb tab flicks it open

Print settings

  • 0.4 mm nozzle, 0.2 mm layers, no supports, print flat as supplied, don't scale, XY compensation 0
  • PETG recommended (the latch flexes better). PLA works, but the latch leg runs near PLA's limit and may whiten or crack after a lot of use
  • 3 walls, 15 to 25% infill. Every file fits a 180 x 180 mm bed; a 256 x 256 mm plate takes 6 clips nested

Please note

Every fit was checked in software: the print gap, the hinge's full travel, the closed jaw and latch gaps, and the hinge's hold against a sideways pull. The set has not yet been test-printed by us, which is why two hinge fits are included. Hand wash only. The clip closes the folded top of a bag; it is not a liquid seal. The bags in the previews are render props and are not included.

Technical details

Formats
STL, 3MF, BLEND
Software
Bambu Studio, PrusaSlicer, OrcaSlicer, Cura, Blender
Provenance
Procedural
AI training
prohibited
Watertight
Yes
Manifold
Yes
Print tested by creator
No
Printer type
fdm
Supports required
none
Dimensions (W×D×H mm)
71 x 43 x 10, 101 x 58 x 10, 133 x 76 x 12 and 173 x 96 x 12 as printed (60, 90, 120 and 160 mm arms)
Recommended print settings
0.4 mm nozzle, 0.2 mm layers, no supports, no scaling, XY compensation 0. PETG recommended. 3 walls, 15-25% infill. Print the standard fit first; loose if the hinge fuses.

Version history

Latest version 1.0.2, released .

  1. 1.0.2

    Download tidy-up: removed internal build files

  2. 1.0.1

    File tidy-up: cleaner file metadata and notes; no changes to the models.

  3. 1.0.0

Reviews

Own this asset? Sign in to review it.

No reviews yet. Owners can share how the asset worked for them.

    Questions & comments

    Sign in to ask the creator a question.

    No questions yet. Ask about formats, compatibility or licensing.