Skip to content
AssetLoom
Interactive 3D preview (reduced-detail model, 50,388 triangles · 44 × 35 × 8.3 cm). The downloadable files are the full-resolution originals.

Description

A modular insert that turns a kitchen drawer into a tidy spice rack. Jars lie on their side with the lid towards you, each in its own shallow cradle so they don't roll, and every row sits a little higher than the one in front, so the lids line up in neat, stepped rows.

How it works

  • Tiers: build a column 2, 3 or 4 tiers deep (238, 353 or 468 mm). Set each tier down behind the one in front: small teeth drop into pockets under the next tier's nose, so the tiers hold together front to back and side to side. Lift a tier to take it off.
  • Cradles: each tread leans back 3 degrees so jars settle against a 5 mm lip, and a 3.5 mm deep cradle per lane keeps round jars centred.
  • Sizes: S for jars up to 45 mm across (lanes 48 mm apart), M up to 52 mm (55 mm) and L up to 62 mm (65 mm). Jars up to about 108 mm long sit fully on a tier.
  • Widths: each column is 1, 2 or 3 lanes wide. Every tier is the same height in every size, so S, M and L columns can stand side by side in one drawer.

What's included (38 print files, each as STL and 3MF, in print orientation)

  • 36 tier pieces: S, M and L x 1, 2 and 3 lanes x tiers 1 to 4
  • A fit test (two small parts) to check the joint on your printer before the long prints
  • The .blend file with every piece in place
  • A README with a size chooser and drawer depth and height tables

Will it fit?

Your drawer's inner height must clear the largest jar on the back tier: with 3 tiers about 74 mm (S), 81 mm (M) or 91 mm (L); with 4 tiers 83, 90 or 100 mm. Smaller jars need less. Columns are not joined side to side; the drawer sides and optional rubber bumpers hold them.

Design

Soft-rounded lips with a fluted front on every tier, quiet cradles and clean undersides. Print it in one colour, or each size in its own.

Print settings

  • 0.4 mm nozzle, 0.2 mm layers, no supports, print as supplied, no scaling
  • PLA or PETG, 2 to 3 walls, 15 % infill
  • Largest piece 195 x 122.6 x 41.8 mm (fits 220 x 220 beds and larger)
  • Taller tiers have open cells underneath with 45 degree roofs, so they print without supports and save filament
  • Four corner recesses underneath for 8 x 2 mm self-adhesive rubber bumpers (optional; fit them to every piece in a column or to none)

Please note

The jars, spices and drawer in the previews and the 3D view are generic render props and are not included. Every fit was checked in software on the exported files. The insert has not yet been test-printed by us, which is why there is a fit test.

Technical details

Formats
STL, 3MF, BLEND
Software
Bambu Studio, PrusaSlicer, OrcaSlicer, Cura, Blender
Provenance
Procedural
AI training
prohibited
Watertight
Yes
Manifold
Yes
Print tested by creator
No
Printer type
fdm
Supports required
none
Dimensions (W×D×H mm)
tier pieces 48-195 wide x 122.6 deep x 15.7/24.4/33.1/41.8 tall; columns 238/353/468 deep with 2/3/4 tiers; fit test 16 x 30 x 20
Recommended print settings
0.4 mm nozzle, 0.2 mm layers, no supports, print as supplied, no scaling, XY compensation 0. PLA or PETG, 2-3 walls, 15 % infill. Print the fit test first.

Reviews

Own this asset? Sign in to review it.

No reviews yet. Owners can share how the asset worked for them.

    Questions & comments

    Sign in to ask the creator a question.

    No questions yet. Ask about formats, compatibility or licensing.