Skip to content
AssetLoom
Interactive 3D preview (reduced-detail model, 5,572 triangles · 12 × 11 × 11 cm). The downloadable files are the full-resolution originals.

Description

Storage boxes that come off the printer already hinged and latching. Base and lid print open, side by side, with the hinge assembled; snap them free, swing the lid over and the tab clicks into place. Nothing to glue, pin or clip together, and no supports.

What's included (13 print files, STL + 3MF, in print orientation)

  • Small (85 x 68 x 38 mm closed), Medium (120 x 93 x 48 mm) and Large (160 x 113 x 59 mm)
  • Each size open or divided: 6, 12 or 15 compartments, with matching dividers in the lid that meet the base dividers with a 0.8 mm gap, so screws, nuts and beads stay in their own compartment
  • Each of these 6 designs in two hinge fits: standard (0.4 mm clearance) and loose (0.5 mm)
  • Hinge test plate: three mini boxes (44 x 43 mm closed) at 0.3, 0.4 and 0.5 mm, marked with 1, 2 and 3 notches, to pick the right fit for your printer
  • The .blend file and the parametric Python generator (change sizes, divider layout or clearances and rebuild)

How it works

  • Hinge: alternating knuckles; 45 degree cone pins on the base knuckles sit in 45 degree cone sockets in the lid knuckles, with the chosen clearance all round. Every surface is 45 degrees or less, so it prints without supports.
  • Latch: a 1.8 mm tab on the lid with a 45 degree hook rides over a lead-in on the base rim and drops into a groove in the base front wall. Pull the lip to open.
  • The lid lands on the base with a 0.2 mm rim gap after its 180 degree turn.

Print settings

  • PLA or PETG (PETG for a longer-lived latch), 0.4 mm nozzle, 0.2 mm layers, 3+ walls, 15-20 % infill
  • Print as supplied, no supports, no scaling; avoid a squashed first layer
  • Large needs a 220 x 220 mm bed (turn off skirt and brim on 220 mm beds); Small and Medium fit any common printer
  • PETG gives a longer-lived latch: the tab bends across the layer lines, so if a tab cracks in PLA, reprint that box in PETG

Please note

The hinge, latch and divider clearances are checked in software (no collisions through the full 0 to 180 degree lid travel on every file) and have not yet been test-printed by us. Print the test minis first and choose the fit that turns freely. Not for food contact or safety-critical use.

Technical details

Formats
STL, 3MF, BLEND
Software
Bambu Studio, PrusaSlicer, OrcaSlicer, Cura, Blender
Provenance
Procedural
AI training
prohibited
Watertight
Yes
Manifold
Yes
Print tested by creator
No
Printer type
fdm
Supports required
none
Dimensions (W×D×H mm)
Closed: Small 85 x 68 x 38.2, Medium 120 x 93 x 48.2, Large 160 x 113 x 59.2; test minis 44 x 43 x 26.2 (plate 74 x 148 x 18)
Recommended print settings
PLA or PETG, 0.4 mm nozzle, 0.2 mm layers, 3+ walls, 15-20% infill, print as supplied (base and lid open, side by side), no supports, no scaling; print the hinge test minis first

Version history

Latest version 1.0.2, released .

  1. 1.0.2

    Download tidy-up: removed internal build files

  2. 1.0.1

    File tidy-up: cleaner file metadata and notes; no changes to the models.

  3. 1.0.0

Reviews

Own this asset? Sign in to review it.

No reviews yet. Owners can share how the asset worked for them.

    Questions & comments

    Sign in to ask the creator a question.

    No questions yet. Ask about formats, compatibility or licensing.