Skip to content
AssetLoom
Interactive 3D preview (reduced-detail model, 31,714 triangles · 8.6 × 19 × 19 cm). The downloadable files are the full-resolution originals.

Description

Put the Christmas lights away so they come out untangled next year. Each reel is two printed flanges that screw together on a wide threaded hub. The plug or battery box sits inside the hub, the cable runs out through a slot that is open at the hub end, and the far end presses into a cord lock in the rim.

Wind it with the crank knob, clip on a tag that says what is on it, and stack the reels in a box. To unload, unscrew flange B, lift the plug and its cable out of the open hub end, and the coil slides off the hub.

Three sizes

  • Small: 140 mm across, 48 mm wide. About 27 m of 3 mm cable or 10 m of 5 mm cable. Fits a 180 mm bed.
  • Medium: 190 mm across, 58 mm wide. About 76 m of 3 mm cable or 27 m of 5 mm cable.
  • Large: 240 mm across, 68 mm wide. About 159 m of 3 mm cable or 57 m of 5 mm cable. Needs a 256 mm bed.

Capacities are a guide for round cable wound neatly; bulbs and loose winding take more room.

Details

  • Two-start thread, about 1.3 turns to close, with standard and loose collars and a small fit test
  • 64 mm hub with a 56 mm opening: USB plugs, small battery boxes and controllers up to about 45 x 30 mm across fit inside
  • Two cord locks with a narrow neck and a round end: flange A for cable up to about 3.5 mm, flange B up to about 6 mm
  • Crank knob snaps into flange A and spins; clip-on label tags fit either rim
  • Wind clockwise as you face the knob, which keeps the screw-on flange tight
  • Fluted rims and petal windows keep the reels light and easy to grip
  • Every flange is its own print, so you can colour-code indoor, outdoor and tree lights

What's included

  • 14 parts, each as STL and 3MF, in print orientation: 3 hub flanges, 6 collar flanges (standard and loose), crank knob, label tag and a 3-part fit test
  • The .blend file with every part
  • A README with sizes, capacities, print settings and how to wind

Print settings

  • 0.4 mm nozzle, 0.2 mm layers, no supports, print as supplied
  • PLA or PETG (PETG for hot lofts), 3 walls, 15 % infill
  • Flanges print outer face down; thread flanks are 43 degrees

Please note

Fairy lights, plugs and the plug box in the previews are not included. Every fit was checked in software on the exported files. The reels have not yet been test-printed by us, which is why the fit test is included.

Technical details

Formats
STL, 3MF, BLEND
Software
Bambu Studio, PrusaSlicer, OrcaSlicer, Cura, Blender
Provenance
Procedural
AI training
prohibited
Watertight
Yes
Manifold
Yes
Print tested by creator
No
Printer type
fdm
Supports required
none
Dimensions (W×D×H mm)
assembled: Small 140 dia x 48, Medium 190 dia x 58, Large 240 dia x 68; hub opening 56; largest part 240 x 240 x 64 (Large flange A)
Recommended print settings
0.4 mm nozzle, 0.2 mm layers, no supports, print as supplied, no scaling, XY compensation 0. PLA or PETG, 3 walls, 15 % infill. Flanges outer face down. Print the fit test first; use the loose collar flange if the standard one binds.

Reviews

Own this asset? Sign in to review it.

No reviews yet. Owners can share how the asset worked for them.

    Questions & comments

    Sign in to ask the creator a question.

    No questions yet. Ask about formats, compatibility or licensing.