Skip to content
AssetLoom
Interactive 3D preview (reduced-detail model, 33,432 triangles · 5.5 × 5.5 × 11 cm). The downloadable files are the full-resolution originals.

Description

Make the gift wrap part of the gift. A maze is cut into the outside of the inner core, and the sleeve that slides over it has two small pins on its inside wall that ride in the grooves. The sleeve hides the maze, so whoever gets the box has to find the way out by feel: twist, slide, back up from dead ends, and it opens when the pins reach the top.

Put a gift card, folded or rolled money, jewellery or a small treat inside, close it by following the map backwards, and hand it over.

Two sizes

  • Small: 55 mm across, 75 mm tall closed. Space inside 42.8 x 70 mm deep for rolled notes, jewellery or earbuds.
  • Large: 75 mm across, 102 mm tall closed. Space inside 62.8 x 97 mm deep: a standard 85.6 x 54 mm gift card stands up inside.

Three mazes per size

  • Easy: 7 moves (Small) or 9 moves (Large), a good first puzzle
  • Medium: 35 or 47 moves, with steps where you must slide back down
  • Hard: 66 or 127 moves, long winding paths and dead ends

Every sleeve fits all three cores of its size, so print one sleeve and swap mazes. A solution map for every maze is included for whoever closes the box.

Sleeves

  • Fluted: fine vertical flutes that match the base, for a clean modern look and a good grip
  • Ribbon: a smooth sleeve with two raised ribbon bands, as a two-colour 3MF for multi-colour printers or a single-colour STL
  • Standard and loose fit for every sleeve, plus a quick fit test
  • Small notches on the sleeve and base line up when the box is closed

What's included

  • 6 cores, 8 sleeves and 3 fit-test parts, each as STL and 3MF, in print orientation
  • 4 two-colour 3MFs for the ribbon sleeves
  • 6 solution maps (PNG)
  • The .blend file with every part
  • A README with sizes, closing steps and print settings

Print settings

  • 0.4 mm nozzle, 0.2 mm layers, no supports, print as supplied, no scaling
  • PLA or PETG, 3 walls, 15 % infill
  • Cores print upright, sleeves print lid-down; groove ceilings and pin undersides are 45 degrees
  • Tallest part 99 mm; every part fits an 80 x 80 mm bed

Please note

The gift card, rolled note and backdrop in the previews are not included. Every fit was checked in software on the exported files. The boxes have not yet been test-printed by us, which is why the fit test is included. A printed puzzle is fun gift wrap, not a lock.

Technical details

Formats
STL, 3MF, BLEND, PNG
Software
Bambu Studio, PrusaSlicer, OrcaSlicer, Cura, Blender
Provenance
Procedural
AI training
prohibited
Watertight
Yes
Manifold
Yes
Print tested by creator
No
Printer type
fdm
Supports required
none
Dimensions (W×D×H mm)
closed: Small 55 dia x 75, Large 75 dia x 102; space inside: Small 42.8 dia x 70 deep, Large 62.8 dia x 97 deep; tallest part 99 (Large core)
Recommended print settings
0.4 mm nozzle, 0.2 mm layers, no supports, print as supplied, no scaling, XY compensation 0. PLA or PETG, 3 walls, 15 % infill. Cores upright, sleeves lid-down. Print the fit test first; use the loose sleeves if the standard ring is tight.

Reviews

Own this asset? Sign in to review it.

No reviews yet. Owners can share how the asset worked for them.

    Questions & comments

    Sign in to ask the creator a question.

    No questions yet. Ask about formats, compatibility or licensing.