Skip to content
AssetLoom
Interactive 3D preview (reduced-detail model, 36,272 triangles · 19 × 6.8 × 5 cm). The downloadable files are the full-resolution originals.

Description

Take the wobble out of cabinets, shelves, desks, workbenches and printer enclosures with feet you print yourself. Screw a socket under the corner (or push an insert into a 25 mm tube leg), then turn the knurled foot by hand to level it and spin the lock nut up to hold it. One turn moves the foot 3 mm.

What's included (22 print files, STL + 3MF, in print orientation)

  • 16 mm thread: foot (Ø40 pad, 26 mm stud), screw-on socket (Ø56 flange, 3 countersunk holes for 4 mm screws) and knurled lock nut
  • 24 mm thread for heavier pieces: foot (Ø56 pad, 32 mm stud), socket (Ø68 flange, 4 holes) and lock nut
  • Tube inserts for 25 mm square or round tube legs with 1.5 or 2.0 mm walls: press-in plugs with crush ribs and a 16 mm internal thread
  • Sockets, lock nuts and inserts in 2 thread fits (standard and loose, marked with 2 or 3 dimples)
  • Fit test kit: a short test bolt and 3 rings (snug, standard, loose) so you can pick your fit in a few minutes
  • The .blend file and the Python generator: change the pitch, clearances, sizes or tube size and rebuild every part with its checks

Height ranges (lock nut fitted)

  • 16 mm socket: 36 to 46 mm from the floor to the surface the socket screws to
  • 24 mm socket: 44 to 56 mm
  • 25 mm tube legs: 18 to 29 mm from the floor to the tube end

Details

  • One thread system for every part: single start, 3 mm pitch, 45 degree flanks, so every thread prints upright without supports
  • Radial clearance of every internal thread: 0.30 (snug, test kit), 0.40 (standard) or 0.55 mm (loose)
  • Every bed edge has a 45 degree chamfer against elephant foot; grips and nuts are knurled for fingers

Print settings

  • 0.4 mm nozzle, 0.2 mm layers, no supports, no scaling, XY compensation 0
  • PETG recommended (PLA for light indoor use); feet, sockets and inserts with 4+ walls and 30 to 40 % infill
  • Every file fits a 180 x 180 mm bed; a 256 x 256 mm plate holds 4 complete 16 mm feet plus the test kit

Please note

Fits and the full screw travel of every mating pair were checked in software on the exported meshes, but the set has not yet been test-printed or load-tested by us, which is why the fit test kit and two fits are included. Measure your tube before printing inserts. These are printed plastic parts: for heavy furniture use PETG, 5 or more walls and the 24 mm size, and don't use them under anything that vibrates or moves (washing machines, machinery). Screws are not included. The cabinet, plinth, board and tubes in the previews are props and are not included.

Technical details

Formats
STL, 3MF, BLEND
Software
Bambu Studio, PrusaSlicer, OrcaSlicer, Cura, Blender
Provenance
Procedural
AI training
prohibited
Watertight
Yes
Manifold
Yes
Print tested by creator
No
Printer type
fdm
Supports required
none
Dimensions (W×D×H mm)
Feet 40 x 40 x 36 and 56 x 56 x 44; sockets 56 x 56 x 20 and 68 x 68 x 24; lock nuts Ø26 x 5 and Ø36 x 6; tube inserts 25 x 25 x 19
Recommended print settings
0.4 mm nozzle, 0.2 mm layers, no supports, no scaling, XY compensation 0. PETG. Feet, sockets and inserts 4+ walls, 30-40% infill. Lock nuts and test kit 3 walls, 30%. Print the fit test kit first.

Version history

Latest version 1.0.2, released .

  1. 1.0.2

    Download tidy-up: removed internal build files

  2. 1.0.1

    File tidy-up: cleaner file metadata and notes; no changes to the models.

  3. 1.0.0

Reviews

Own this asset? Sign in to review it.

No reviews yet. Owners can share how the asset worked for them.

    Questions & comments

    Sign in to ask the creator a question.

    No questions yet. Ask about formats, compatibility or licensing.