Skip to content
AssetLoom
Interactive 3D preview (reduced-detail model, 44,974 triangles · 24 × 14 × 1.6 cm). The downloadable files are the full-resolution originals.

Description

Three printable workshop gauges in one set, with every size and scale engraved: a screw sizer and length gauge, a drill and rod gauge, and eight radius gauge leaves. All print flat with no supports.

What's included (11 print files, STL + 3MF, in print orientation)

  • Screw gauge (140 x 64 mm): size holes for M2, M2.5, M3, M4, M5, M6, M8 and M10, plus a 90 degree V groove with a head stop and two 0 to 110 mm scales
  • Drill and rod gauge (132 x 64.8 mm): 25 holes from 1.0 to 13.0 mm in 0.5 mm steps, for drill bits, dowels, pins and rod
  • Radius gauge leaves R1, R2, R3, R4, R5, R6, R8 and R10 (75 mm long): each has a convex corner for inside fillets and a concave notch for rounded outside edges, plus a pivot hole for an M5 bolt or a binder ring. Supplied as single files and as one plate
  • The .blend file and the Python generator (change hole sizes, the scale length or the radii and rebuild)

How the length gauge works

Lay the screw in the V groove. Cap, pan, button and hex heads go behind the head stop, and you read the top row (UNDER HEAD). Countersunk screws lie on the scale side with the flat head against the stop, and you read the bottom row (OVERALL). Each row matches how that kind of screw is sold. Small M2 and M2.5 heads only just overlap the notch, so hold them firmly against the stop.

Print settings

  • PLA or PETG, 0.4 mm nozzle, 0.2 mm layers, 3 walls, 15 to 20 % infill (100 % for the 2 mm leaves)
  • Print as supplied, flat, no supports, no scaling. The gauges together fit a 180 x 180 mm bed; the leaf plate is 156 x 118 mm
  • Holes are modelled slightly oversize (screw holes nominal + 0.3 mm, drill holes nominal + 0.15 mm) to allow for printed holes coming out small

Please note

These are printed sorting gauges, not calibrated instruments. The models are exact (holes within 0.01 mm, radius arcs within 0.003 mm in software), but printed parts are typically accurate to 0.1 to 0.2 mm. That is plenty to tell an M4 from an M5 or a 6 mm bit from a 6.5 mm one. The 1.0 and 1.5 mm holes are near the limit of a 0.4 mm nozzle. Checked in software; not yet test-printed by us.

Technical details

Formats
STL, 3MF, BLEND
Software
Bambu Studio, PrusaSlicer, OrcaSlicer, Cura, Blender
Provenance
Procedural
AI training
prohibited
Watertight
Yes
Manifold
Yes
Print tested by creator
No
Printer type
fdm
Supports required
none
Dimensions (W×D×H mm)
Screw gauge 140 x 64 x 13; drill and rod gauge 132 x 64.8 x 4.5; radius leaves 75 x 22-32 x 2 (plate of 8: 156 x 118 x 2)
Recommended print settings
PLA or PETG, 0.4 mm nozzle, 0.2 mm layers, 3 walls, 15-20% infill (100% for the leaves), print flat as supplied, no supports, no scaling, slicer XY hole compensation 0; check the 0.5 mm scale ticks in the slicer preview (Arachne recommended)

Version history

Latest version 1.0.2, released .

  1. 1.0.2

    Download tidy-up: removed internal build files

  2. 1.0.1

    File tidy-up: cleaner file metadata and notes; no changes to the models.

  3. 1.0.0

Reviews

Own this asset? Sign in to review it.

No reviews yet. Owners can share how the asset worked for them.

    Questions & comments

    Sign in to ask the creator a question.

    No questions yet. Ask about formats, compatibility or licensing.