Skip to content
AssetLoom
Interactive 3D preview (reduced-detail model, 19,012 triangles · 36 × 12 × 6 cm). The downloadable files are the full-resolution originals.

Description

Build a paint station that fits your desk and your collection. Every module is a 3-tier stepped rack that prints the way it stands, and any two modules join side by side with a hidden bowtie key, so you can mix dropper bottles, pots and brushes in one straight row with the backs in line.

What's included (12 print files, STL + 3MF, in print orientation)

  • Dropper bottle racks for bottles up to 26 mm across (most 17 to 18 ml droppers): 4-wide (12 bottles, 128 x 96 x 60 mm) and 2-wide (6 bottles)
  • Pot racks for round pots up to 35 mm across (most 12 ml flip-lid pots): 4-wide (12 pots, 164 x 123 x 44 mm) and 2-wide (6 pots)
  • Brush module (64 x 96 x 60 mm): 8 brush holes (9 mm) in the upper tiers and a small-parts tray (52 x 18 x 7 mm) in front for craft blades, drill bits, pins and a short sculpting tool
  • Joining keys in 3 fits (snug, standard, loose; marked with 1, 2 or 3 dimples)
  • Fit test kit: a small block with the same slot (print 2) and three short keys, so you can pick your fit in a few minutes
  • The .blend file and the Python generator: change pocket size, pitch, tier height or width and rebuild for any bottle

Details

  • An 8 mm swatch dot under every bottle position: dab the colour in, or stick on a small round label
  • Recesses under each corner for 10 mm self-adhesive bumpers
  • Pockets 6 mm deep with chamfered rims; all outer edges chamfered, including a first-layer chamfer against elephant foot
  • Keys slide up into a slot that is open at the bottom and closed at the top, so nothing shows from above

How it goes together

Print the fit test first and pick the key fit that slides together by hand and holds the blocks in line. Push a key up into the side slot of one module from underneath, then lower the next module onto it until both sit flat.

Print settings

  • 0.4 mm nozzle, 0.2 mm layers, no supports, no scaling, slicer XY compensation 0
  • Racks and brush module: PLA or PETG, 3 walls, 10 to 15 % infill, flat as supplied (about 130 g for a 4-wide dropper rack and 165 g for a 4-wide pot rack at 12 % infill, by our estimate)
  • Keys: 3 walls, 40 % infill or more, lying on a flat face as supplied
  • Every file fits a 180 x 180 mm bed

Please note

Measure one of your bottles before printing: the pockets are 27.2 mm (droppers) and 36.4 mm (pots). Fits were checked in software (0.10, 0.20 or 0.30 mm clearance per key flank, measured on the exported meshes), but the set has not yet been test-printed by us, which is why the fit test kit and three key fits are included. The bottles, pots, brushes, tools, drill bits and paint swatches in the previews are props and are not included.

Technical details

Formats
STL, 3MF, BLEND
Software
Bambu Studio, PrusaSlicer, OrcaSlicer, Cura, Blender
Provenance
Procedural
AI training
prohibited
Watertight
Yes
Manifold
Yes
Print tested by creator
No
Printer type
fdm
Supports required
none
Dimensions (W×D×H mm)
Dropper racks 128 or 64 x 96 x 60; pot racks 164 or 82 x 123 x 44; brush module 64 x 96 x 60; keys 27.5 x 11.0-11.4 x 11.4
Recommended print settings
0.4 mm nozzle, 0.2 mm layers, no supports, no scaling, XY compensation 0. Racks PLA or PETG, 3 walls, 10-15% infill. Keys 3 walls, 40%+ infill. Print the fit test kit first.

Version history

Latest version 1.0.1, released .

  1. 1.0.1

    File tidy-up: cleaner file metadata and notes; no changes to the models.

  2. 1.0.0

Reviews

Own this asset? Sign in to review it.

No reviews yet. Owners can share how the asset worked for them.

    Questions & comments

    Sign in to ask the creator a question.

    No questions yet. Ask about formats, compatibility or licensing.