Skip to content
AssetLoom
Interactive 3D preview (reduced-detail model, 10,296 triangles · 18 × 11 × 1.9 cm). The downloadable files are the full-resolution originals.

Description

A 7-day pill organiser where every lid slides in 45 degree dovetail grooves, so it can't lift off, and clicks over a small detent so it stays shut in a bag. Each lid has its day (MO to SU) debossed on top, so you can read it or feel it.

What's included (20 print files, STL + 3MF, in print orientation)

  • 1-row trays (once a day) and 2-row trays (morning lids slide out of the front, evening lids out of the back) in 3 cell sizes: S 18 x 22 x 12 mm (about 5 ml), M 22 x 28 x 15 mm (about 9 ml), L 26 x 34 x 19 mm (about 16 ml)
  • Lid plates of 7 lids for every size, in standard (0.25 mm) and loose (0.35 mm) fits, with front-row and back-row lettering so both rows read from the front
  • A small fit test (one shallow cell and one lid of each fit) to print first
  • The .blend file and the Python generator: change cell sizes or clearances and rebuild every part with its checks

Three doses a day? Use a 2-row tray plus a 1-row tray, and print each time of day in its own colour.

How it works

  • Dovetail lids: 45 degree tongues on both lid edges ride in grooves in the walls. The lid slides freely and can't be lifted out
  • Detent: a small nub under the middle of the lid clicks over the front wall as it closes (a lighter click on the loose lids); the back wall is the stop
  • Rounded cell floors at the front and back so pills tip out easily, and thumb grooves at the pull edge

Print settings

  • 0.4 mm nozzle, 0.2 mm layers, no supports, print as supplied, don't scale, XY compensation 0
  • PETG or PLA, 3 walls, 15 to 20% infill. Trays print upright, lids print top face down
  • Bed length needed for a tray: about 165 mm (S), 193 mm (M) or 221 mm (L). A 256 x 256 mm plate takes the 2-row M tray, the 1-row M tray and 14 lids

Please note

Every fit was checked in software on the exported meshes: each lid put back in its tray, side clearance, lift-out lock, the full slide-out and the detent. The set has not yet been test-printed by us, which is why the fit test and two lid fits are included. This is a storage box: it is not child-resistant and not airtight. Ordinary PLA and PETG aren't certified for food contact. Hand wash only. The pills in the previews are render props.

Technical details

Formats
STL, 3MF, BLEND
Software
Bambu Studio, PrusaSlicer, OrcaSlicer, Cura, Blender
Provenance
Procedural
AI training
prohibited
Watertight
Yes
Manifold
Yes
Print tested by creator
No
Printer type
fdm
Supports required
none
Dimensions (W×D×H mm)
1-row trays 154.6 x 25.2 x 16, 182.6 x 31.2 x 19, 210.6 x 37.2 x 23; 2-row trays 49.2, 61.2 and 73.2 deep; lids 2 mm thick
Recommended print settings
0.4 mm nozzle, 0.2 mm layers, no supports, no scaling, XY compensation 0. PETG or PLA, 3 walls, 15-20% infill. Print the fit test first, then the standard or loose lid plates.

Version history

Latest version 1.0.1, released .

  1. 1.0.1

    File tidy-up: cleaner file metadata and notes; no changes to the models.

  2. 1.0.0

Reviews

Own this asset? Sign in to review it.

No reviews yet. Owners can share how the asset worked for them.

    Questions & comments

    Sign in to ask the creator a question.

    No questions yet. Ask about formats, compatibility or licensing.